BMW Touring plug-in hybrid 3 Series Owner's Handbook Manual page 135

For further information:
Driving modes for optimising consumption, see
page 350.
Switching off
Press and hold the button until the
LEDs are extinguished.
Regulation climate control
Principle
Depending on the equipment, some heating and
cooling functions can be activated automatically
according to the outside temperature.
General
The outside temperature from which the func‐
tions are to be activated automatically can be set
using iDrive.
Activation is performed if the outside tempera‐
ture exceeds or falls below the set temperature
in the first few minutes after drive-ready state
has been switched on. A new alignment is car‐
ried out after the settings have been changed.
Depending on the equipment version, the
following functions can be activated automati‐
cally:
▷ Seat heating.
▷ Steering wheel heating.
If the journey is continued within about 15 mi‐
nutes after a temporary stop, the functions are
automatically activated with the most recent set‐
tings.
Operating requirements
▷ The seat belt of the driver's seat is fastened.
▷ The drive-ready state is switched on.
Seats, mirrors and steering wheel
Online Edition for Part no. 01405A1EA53 - X/20
Activating/deactivating
1. "CAR"
2. "Settings"
3. "Climate comfort"
4. If necessary, "Regulation climate control"
5. Select the desired function.
6. Activate the required rule.
7. If applicable, adjust the level.
CONTROLS
135