Units Of Measure; Illustration; Scope; Part Numbers - Honeywell JetWave MCS-8562 Installation And Maintenance Manual

SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
D.

Units of Measure

(1) Measurements, weights, temperatures, dimensions, and other values are expressed in
the USMS followed by the appropriate SI metric units in parentheses. Some standard tools
or parts such as drills, taps, bolts, nuts, etc. do not have an equivalent.
E.

Illustration

(1) Supplemental illustrations use a suffix number to the basic figure number. For example,
if Figure 501-5 is used, it signifies that it is an illustration of the item identified by index
number 5 in Figure 501.
(2) Illustrations with no specific designation are applicable to all units.
2.

Scope

This manual provides detailed information for avionics technicians about the wiring and installation of
every component of the JetWave™ MCS-8562 Terminal. The radome selected must be approved by
Honeywell in order to meet the performance standards. The radome installation will depend on the
radome selected by the installer for each aircraft type. The installer is responsible for the approval and
certification of system components on the aircraft, and for the installation of wiring in the aircraft.
3.

Part Numbers

The following Part Numbers and variants cover the various JetWave™ MCS-8562 Terminal hardware
configurations:
- 90400012-0001 or 90400012-0002 - Modman
- 90401121 - APM
- 90002609-001 - FMA
- 90404518 - KANDU
- 90003227-003 BUC-HPA
EFFECTIVITY
ALL
© Honeywell International Inc. Do not copy without express permission of Honeywell.
JetWave™ MCS-8562 Terminal
23-15-84
Page INTRO-2
11 Nov 2020