Advertisement
IR User Guide:
•
IR receiver extension cable should be connected to the IR IN port of the receiver.
•
The IR emitter extension cable should be connected to the IR OUT port of the
transmitter.
•
The emitter of the IR extension cable should face as close as possible to the IR
receiving window of the source device.
•
Face the receiving head of the IR receiver extension cables toward the user for
unobstructed line of sight to the remote control.
•
The IR receiver detects the users remote control and transmits the signal down the
network cable to the IR emitter which replicates the IR output to control the source
device.
SPECIFICATIONS
Voltage/Current
Power consumption
HDMI compliance
HDCP compliance
HDMI resolution
IR signal
Network CAT5/5e/6
Working temperature
Storage temperature
Humidity
Dimension (splitter)
Material
Weight (splitter)
CLEANING & MAINTENANCE
Clean the outside casing with a soft cloth lightly moistened with mild soap and water.
Never use any abrasive or solvents.
CPC Farnell declares that the radio equipment for wireless transmitter/receivers is in
compliance with Radio Equipment Directive 2014/53/EU
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF ELECTRICAL &
ELECTRONIC EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste Electrical
& Electronic Equipment (WEEE). Any WEEE marked products must not be mixed with
general household waste, but kept separate for the treatment, recovery and recycling of
the materials used. Contact your local authority for details of recycling schemes in your
area.
DC 12V 2A
<24W
HDMI 1.4
HDCP 1.4
480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz,
720p@50/60Hz, 1080i@50/60Hz, 1080p@50/60Hz
4Kx2K@24/25/30Hz
Support 20~60kHz IR device
<80m/<100m/<120m
0~60°C
-30~ 70°C
0~90%RH (no condensation)
483(W) x 110(D) x 45(H)mm
Alloy
1390g
4
Made in China.
PO Box 13362 Dublin 2
PR2 9PP
Man Rev 1.1
Advertisement
