Do you have a question about the ASR100 and is the answer not in the manual?
Questions and answers
Summary of Contents for Autel ASR100
Page 1
ASR100 Side Radar User Manual V1.0 Autel Intelligent Automobile Corp., Ltd...
Page 2
All information, specifications and illustrations in this manual are based on the latest information available at the time of printing. Autel Intelligent Technology Corp., Ltd. reserves the right to make changes at any time without notice. While information in this manual has been carefully checked for accuracy, no guarantee is given for the completeness and correctness of the contents, including but not limited to product specifications, functions and illustrations.
Page 3
Revision History Date Version Version description 2021-09-05 ASR100 Side Radar User Manual Version 1.0...
1. ASR100 Side Radar Introduction ASR100 is a millimeter-wave radar based on the 77 GHz frequency band, with an ultra- wide field of view. The millimeter-wave radar can accurately measure the target distance, speed, angle, and other information through the difference in echoes between the transmitting and receiving electromagnetic waves.
(3) Please follow the installation instructions for the radar sensor to avoid the installation error exceeding the error limit. (4) ASR100 millimeter-wave radar performs automatic fault detection after power-on. If there is a fault, please do not use it. (5) Be sure to conduct the test in an outdoor open field and pay attention to the...
If you encounter problems that cannot be resolved, please contact Autel’s customer service staff. We will diligently help you resolve the problem at the earliest! Notice: In order to protect human health, this device meets the thresholds for exposure of the general public to electromagnetic fields according to Council Recommendation 1999/519/EC.
4.2 ASR100 side radar connection relationship When the ASR100 millimeter-wave radar is used, the radar module is powered by the vehicle power supply, and the vehicle and the radar communicate through the CAN interface connection. The radar outputs detection and warning information to the host...
Vehicle Radar Supply Host computer Figure 7 ASR100 radar debugging connection relationship diagram 4.3 ASR100 side radar installation and calibration Radar Installation Installation position: The radar should be installed on the right side of the truck. For right rudder country please install on the left side of the truck. We recommend you install it on the side guard plate, side guard rail or side fuel tank of the truck.
Page 10
Installation Vertical Angle 30-120cm Example of Installation In order to control installation deviations, an optional auxiliary mounting bracket can be used to adjust the direction and angle during installation. 1. With the front of the radar (the side with the plastic casing) facing the detection area, fix the radar to the mounting bracket using the screws.
Page 11
Input Signal Access The Autel ATS100 requires the 5 interior signals below for its normal operation. The radar automatically reads these CAN J1939 signals by default: 1. Vehicle speed 2.
KL15 on the main fuse board and connect the radar to it. On a Mercedes-Benz Actros, for instance, KL15 (+) is located on the left side of main fuse board in front of the front passenger seat, and KL31 (−) on the right side, as shown in the image below. Installation and Risk Notes 5.1 Installation precautions 1.
Need help?
Do you have a question about the ASR100 and is the answer not in the manual?
Questions and answers