Advertisement
1
ATTACH FRONT AXLE TO CART BED
1. Position the cart bed on a flat surface so both sides
can be accessed. With assistance, place the axle
assembly on the bed and align all mounting holes.
2. Insert two 5/16" x 1-3/4" bolts through the bed and
through the mounting holes of the axle assembly,
add flat washers, and locknuts.
3. Slightly tighten bolts using a ratchet and socket
and wrench. Do not fully tighten at this time. Allow
some play so you can align the remaining bolts.
4. Insert two 5/16" x 3/4" bolts through the bed and
axle brace, add washers and locknuts, and tighten.
5. Finally, insert two 1/4" x 1/2" bolts through the bed
and axle brace, add flat washers and locknuts, and
tighten. (These are the two smallest bolts.)
6. Return to main bolts (Step 2) and tighten.
ATTENTION: Position all locknuts
and washers on the underside of
the cart bed as shown.
5/16" Flat Washers (4)
1/4" x 1/2" Hex Bolts (2)
Wrench
1/4" Locknuts (2)
Socket and Ratchet
1/4" Flat Washers (2)
Revision date: 11.10.10
5/16" Locknuts (4)
Front Axle (1)
1
To prevent damage to the
bolts, do not overtighten.
Bolts should be snug.
All nuts will be on the
underside of the cart bed
when installed correctly.
Parts List and Tools Required
5/16" x 3/4" Hex Bolts
(2)
CARTS AND WAGONS
2
3
4
5
5/16" x 1-3/4" Hex Bolts
(2)
Cart Bed (1)
3
Advertisement
