ColdTech CFD-1F Owner's Manual
  1. Manuals
  2. Brands
  3. ColdTech Manuals
  4. Refrigerator
  5. CFD-1F
  6. Owner's manual

ColdTech CFD-1F Owner's Manual

Commercial refrigerator and freezer
Hide thumbs Also See for CFD-1F:

Advertisement

Table of Contents

COMMERCIAL REFRIGERATOR AND FREEZER
OWNER'S MANUAL
Models: CFD-1R, CFD-1F, CFD-2R,
CFD-2F, CFD-3R, CFD-3F
This manual contains important information regarding your
ColdTech
new
unit. Please read the manual thoroughly prior
to equipment set-up, operation and maintenance.
Failure to comply with regular maintenance guidelines outlined
in this manual may void warranty. MUST READ!!!
1575 Zephyr Avenue
Hayward, CA 94544
(800) 314-4477 (510) 477-3400
f: (510) 477-3413
www.coldtechUSA.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CFD-1F and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for ColdTech CFD-1F

Summary of Contents for ColdTech CFD-1F

  • Page 1 COMMERCIAL REFRIGERATOR AND FREEZER OWNER'S MANUAL Models: CFD-1R, CFD-1F, CFD-2R, CFD-2F, CFD-3R, CFD-3F This manual contains important information regarding your ColdTech unit. Please read the manual thoroughly prior to equipment set-up, operation and maintenance. Failure to comply with regular maintenance guidelines outlined in this manual may void warranty.

  • Page 2: Exclusion From Warranty

    LIMITED WARRANTY Jimex Corp. warrants to the original purchaser the ColdTech unit sold and all parts thereof to be free from defects in material or workmanship, under normal use and service for a period of one (1) year from the date of purchase.

  • Page 3: Installation

    IMPORTANT!!! PLEASE READ BEFORE INSTALLATION 1) If the unit has recently been transported please let unit stand still for a minimum of 24 hours before plugging it in. 2) Make sure that the unit drops down to desired temperature before loading the unit with product. 3) Make sure that there is proper ventilation around the unit in the area where it will operate.

  • Page 4: Shelf Bracket Installation

    SHELF BRACKET INSTALLATION Make sure to follow diagrams to properly install shelf brackets!!! (picture of interior pilasters, right side) back (picture of interior pilasters, left side) front 1) Attach the back of the bracket first by sliding the opening (a) into the back pilaster 2) Attach the front of the bracket by securing the opening (b) into the front pilaster with a downward motion (IMPORTANT!!!) left...

  • Page 5: Safety Warning

    Please pay close attention the the safety notices in this section. Disregarding these notices may lead to serious injury and/or damage to the unit. ATTENTION UNPLUG CORD 1) To minimize shock and fire hazards, be sure not to overload outlet. Please designate one outlet for your unit.

  • Page 6: Cleaning The Condenser Coil

    For efficient operation, it is important that the condenser surface be kept free of dust, dirt, and lint. ColdTech recommends cleaning the condenser coil and fins at least once per month. Clean with a commercial condenser coil cleaner, available from any kitchen equipment retailer. Brush the condenser fins from top to bottom, not side to side.

  • Page 9: Settings

    Defrost termination temp F = Farenheit (degrees) min. = minutes hr. = hours Do not change the default settings of your ColdTech unit without consulting a qualified service technician or the ColdTech service department. Set Range -40 F ~ set temp...
  • Page 10 Defrost termination temp F = Farenheit (degrees) min. = minutes hr. = hours Do not change the default settings of your ColdTech unit without consulting a qualified service technician or the ColdTech service department. Set Range -40 F ~ set temp...

  • Page 11: Troubleshooting

    SYMPTOM Compressor not running. Condensing unit runs for long periods of time. Cabinet temperature is too warm. Cabinet is noisy. POSSIBLE CAUSE Fuse blown or circuit breaker tripped. Power cord unplugged. Thermostat set too high. Cabinet in defrost cycle. Excessive amount of warm product placed in cabinet.
  • Page 12 Please read the entire manual carefully before installation and operation. If certain recommended procedures are not followed, warranty claims will be denied. Notice: ColdTech reserves the right to make changes in design and specifications without prior notice. MODEL #: _______________________________...

This manual is also suitable for:

Cfd-2fCfd-3fCfd-2rCfd-3rFd-1rCfd-1r

Table of Contents

Save PDF