Advertisement
Fig 1
5.
MAINTENANCE
5.1
There is no requirement to service the following items:
Pressure Transducer
Electronic Control Board
5.2
Weekly
Check hose and tyre connector. If leaks are evident then replace, small leaks will be evident by constant refilling of
the tyre.
Annual
Disconnect air Input supply and tyre hose from the head. Unscrew captive sintered filters from filter housings and
clean or replace.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and compo-
nent parts without prior notice. IMPORTANT: No liability is accepted for incorrect use of this equipment. WARRANTY: Guarantee
is 12 months from purchase date, proof of which will be required for any claim. INFORMATION: For a copy of our latest cata-
logue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
Declaration of Conformity
We, the sole importer into the UK, declare that the product listed here is in conformity with the
following standards and directives.
DIGITAL TYRE INFLATOR
(WALL MOUNTED )
Model: SA3702
98/37/EC Machinery Directive
93/68/EEC Marking Directive
89/336 EEC EMC Directive
73.23/EEC Low Voltage Directive
01284 757500
The construction file for this product is held by the Manufacturer and
may be inspected, by a national authority, upon request to Jack
Sealey Ltd.
Signed by
Mark Sweetman
01284 703534
4th November 2004
www.sealey.co.uk
Web
For Jack Sealey Ltd.
Sole importer into the UK
of Sealey Professional Tools.
sales@sealey.co.uk
email
SA3702 - 1 - 51104
Advertisement
