Table of Contents
Advertisement
EN
The device should be operated in accordance with the Regulation of the Minister of Economy of
April 27, 2000. on health and safety at work during welding (Journal of Laws No. 40 item 470).
Keeping this user manual and following the guidelines outlined in it will allow for proper maintenance
of the device in the future. The following warnings are intended to ensure user safety and environ-
mentally friendly operation. Read the entire manual carefully before installing and using the device.
- After opening the packaging, check that the device has not been damaged during transport. If in
doubt, contact our service department.
- The device should only be used by a trained employee or consumer.
- When installing the appliance, you should entrust all electrical activities to a qualified electrician.
2. APPLICATION
The devices are used for manual arc welding in the GMAW (Gas Metal Arc Welding), GTAW (Gas
Tungsten Arc Welding) and SMAW (Shielded Metal Arc Welding) methods.
3. DESCRIPTION OF THE MACHINE
The devices are modern inverter sources offering very high welding versatility. Their main advantage
is the possibility of welding using single or double pulse current in MIG or MAG mode. Thanks to the
use of modern IGBT technology and high-quality components, they are ideal for works related to the
automotive industry, steel constructions, welding of aluminum alloys and others.
Reliability, a wide range of applications (the ability to carry out work in three welding methods: MIG /
MAG, TIG-LIFT DC, MMA) make the device satisfy even the most demanding users.
4. DEVICE CONNECTION - WELDING POLARITY SETTING
MIG/MAG WELDING
Select the correct welding polarity as shown above.
Positive polarity welding (MIG / MAG gas shielded solid wire welding)
Welder's current plug connected to the positive + socket (EURO)
5
Advertisement
Table of Contents
