Warranty - Eagle Hydraulic Operation And Troubleshooting Manual

IMPORTANT
Thank you for purchasing one of our Eagle Hydraulic® power unit.
Before you start using your new power unit, please make sure that you read and understand the owner's
instructions and that you always operate this equipment in a safe manner. For any technical problems or
questions, please consult a qualified hydraulic technician or call your nearest Eagle Hydraulic distributor.

WARRANTY

All power units from Eagle Hydraulic are warranted free from defective parts, workmanship and/or assembly
errors for a period of one (1) year from the date of manufacturing.
Power units are supplied with a model number and a serial number. Please make sure you have those
information on hand when calling. Power units without the model number and/or serial number will NOT be
covered under warranty. Any disassembly or modification made on a power unit that is still under warranty will
automatically VOID that warranty.
Eagle Hydraulic stands behind their products. All our power units are tested and verified prior to shipping.
Therefore, any signs of improper application will void the warranty.
Examples of improper applications are:
• Low voltage: inadequate power source can damage electrical components
• High amperage draw: bad grounds or excessive amperage can burn the electrical components
such as the starter, coils, motor and/or hand control
• Oil quality: contaminated oil or incompatible oil can damage pumping system, valves and the
actuator. The type of oil used, and the verification of oil quality is the responsibility of the end
user. Eagle Hydraulic recommends:
ISO 32, filtered to 20 microns or better
• Environment: the performance of your power unit can be affected by the environment. For
example, if the power unit is not carefully protected or if the environment is salty, acidic, very
cold, very hot, etc.
OPERATION AND TROUBLESHOOTING GUIDE
1