Table of Contents
Advertisement
Installation Overview
Installing your sensor is a simple process.
1
Locate the antenna and screw it into the top-right corner of the sensor, just above the air vents, until it is
secure.
Note: Sharp objects should be stored out of reach of children to prevent injury.
2
Insert the batteries. On the bottom of the sensor, slide open the door and insert two AAA
alkaline batteries. The back of the battery door of the sensor indicates the polarity (+ and -) of
the batteries. Close the door after inserting batteries.
The sensor does not support rechargeable N
employ built-in power saving functionality.
3
Register your sensor with your Wireless System:
a. In the homesight software, click System Se
b. Select "Device Discovery"
c.
Select "Start Discovery."
d.
Locate the Discovery button on the device (indicated by
use the Discovery tool to depress the hidden button.
4
After a few seconds, the System Controller will find and re
appear on the scree
5
Mount the sensor.
F
eature Locator
Back
from the menu.
n.
Discovery
button
iCad or NiMH batteri
es. However, the sensor does
ttings.
"Discovery" and an arrow on the device) and
gister your sensor and details of the device will
Battery
compartment
3
Bottom
Advertisement
Table of Contents
