Motorola hmsm4160 Quick Start Manual

Water sensor.
Hide thumbs
   

   Related Manuals for Motorola hmsm4160

   Summary of Contents for Motorola hmsm4160

  • Page 2: How It Works, Package Contents

    Using your computer and the Wireless System Controller, you locally manage your home environment with the Motorola homesight software. When configured, the system can notify you of any new events by sending an e-mail when your Water Sensor detects an event. An event is defined as a change from a wet or dry state where the tip of the water sensor probe is located.

  • Page 3: Installation Overview

    Installation Overview Installing your sensor is a simple process. Locate the antenna and screw it into the top-right corner of the sensor, just above the air vents, until it is secure. Note: Sharp objects should be stored out of reach of children to prevent injury. Insert the batteries.

  • Page 4

    Please consider the following points when mounting the sensor: • The homesight Wireless Water Sensor is constructed of UV-resistant ABS plastic. Do not install the sensor where it is subjected directly to the elements. • This device’s communication range is up to 60 ft (18 m) from the Wireless System Controller in a typical home, depending on the number of obstacles.

  • Page 5

    Wall Mount Drilling Template Mounting tools: Screwdriver, electric drill, or awl. On hard surfaces, Motorola recommends that you pre-drill ½-inch-deep pilot holes with a drill bit slightly smaller than the bracket mounting screws before securing the bracket to the surface. When mounting a sensor on soft surfaces like sheetrock, use an awl to punch holes in the material slightly smaller than the plastic anchors included in the hardware mounting kit.

  • Page 6: Troubleshooting

    Features and Specifications • Wireless connectivity to the System Controller • Operates on 2-AAA Alkaline batteries (included) • LED indicator when sensor is triggered Frequency Range: Typical open air range (line of sight): Typical indoor range: Sensor size: Troubleshooting Problem LED does not light up Wireless System Controller does not recognize the sensor...

  • Page 7

    The battery is expected to last up to 12 months. This depends on actual use and how often the sensor is triggered. The Motorola Water Sensor includes a battery saving feature that causes the sensor to hibernate when there is no activity and wake up when the sensor is triggered.

  • Page 8: Regulatory Information

    In order to use these products, you need broadband service. Motorola cannot guarantee the availability, reliability or performance, such as speed, of the broadband service you use, which may be affected by, among other things, (i) network traffic, (ii) other services offered by your broadband service provider, (iii) the performance of your computer equipment, (iv) the performance of your service provider's network, and (v) the availability of Internet router(s).

  • Page 9: Limited Warranty

    (ii) the Software will perform materially as described in its documentation. This Limited Warranty to you, the original end user customer, continues (A) for Software and the media upon which it is provided, for a period of ninety (90) days from the date of purchase from Motorola or an authorised Motorola reseller, and (B) for the Product (excluding Software), for a period of one (1) year from the date of purchase from Motorola or from an authorized reseller.

  • Page 10

    Motorola, Inc. Motorola reserves the right to revise this publication and to make changes in content from time to time without obligation on the part of Motorola to provide notification of such revision or change. MOTOROLA PROVIDES THIS GUIDE WITHOUT WARRANTY OF ANY KIND EITHER IMPLIED OR EXPRESS, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Comments to this Manuals

Symbols: 0
Latest comments: