Advertisement
MICRO USB CABLE
ALLIGATOR CLIPS
The large plug connects
to your computer
The small plug connects
to the Makey Makey Bit
PINCH THE CLIP
TO OPEN AND PLACE
IN PROVIDED HOLES
ON THE BOARD
MEET THE ACCESSORY
Use the micro USB cable to
connect the Makey Makey
Bit to your computer.
HOW IT WORKS
The micro USB cable sends
signal information between
the Makey Makey Bit and
the computer. For example,
when you trigger the
pad of the Makey
ARROW
Makey Bit, information is
sent through the cable to
control the
LEFT ARROW
key on the computer.
MEET THE ACCESSORY
The alligator clips let you
connect the Makey Makey
Bit to conductive materials.
HOW IT WORKS
Alligator clips extend the
electrical signal beyond the
Makey Makey Bit because
the clips and wires are
conductive. To connect to
the Bit, pinch the plastic on
the clip to open it and then
place it into the holes on
the board. The free end of
the clip can be connected
to a conductive material
or object. For conductive
material ideas, see page 25.
LEFT
21
Advertisement
