Advertisement
1
Connecting for Component Video (YPbPr)
Manufactured under license from Dolby Laboratories.
Dolby and the double -
D symbol are trademarks of Dolby Laboratories.
Y
VIDEO
Pb
L
100~240V AC
Pr
R
50~60 Hz, 2A
RS - 232
OPTICAL
S-VIDEO
TV
Component video cable
Component
Video Input
Y
Pb
Pr
Component video provides the highest level of picture quality. If your television has component video inputs
(Y, Pb and Pr connectors), connect to the component video connections on your HDT100 instead of the VIDEO or
S-VIDEO connections. (To connect for S-Video or Composite Video, see the instructions in the HDT100 User Guide.)
To connect for component video:
- Connect the component video cable supplied with the HDT100 to the ,
Y Pb
Once you complete your video connections, proceed to the instructions for the audio connections.
AUTO SCAN
Before you can start using the HDT100, you need to program it with the station numbers of the over-the-air digital TV stations available in
your area. This can be done by simply running
Auto Scan
from the HDT100's on-screen menu
You can navigate the on-screen menu from the HDT100's front panel or by using the remote control:
- Use the
and
arrow keys to move up and down the on-screen menu
- Use the
SELECT
button to select the highlighted item on the on-screen menu
- Use the
EXIT
button to return to the main menu from a submenu or to leave the main menu
To run auto scan:
1
Press the
POWER
button on the HDT100 front panel or remote control to turn on the receiver.
2
Press
MENU
on the remote control or
MENU/ENTER
on the front panel. The Menu screen is displayed:
3
Using the
arrow key, highlight
Installation
and press
SELECT
. The Password window is displayed.
2
HDT100
ANT IN
To hook up your audio connections:
- Connect the stereo audio cable supplied with your HDT100 to the and
and
connectors on your TV.
LEFT
RIGHT
Now proceed to the next step - connecting your antenna and power cord.
, and
Pr
connectors on your TV and HDT100.
4
Enter the default password:
after
you have completed steps 1-3 above.
5
Highlight
Auto Scan
The HDT100 starts scanning from Channels 2 to 69. The entire scan will take about four minutes. An indicator is displayed
showing the scan's progress:
Audio Connections
HDT100
Manufactured under license from Dolby Laboratories.
Dolby and the double -
D symbol are trademarks of Dolby Laboratories.
Y
VIDEO
Pb
L
100~240V AC
Pr
R
50~60 Hz, 2A
RS - 232
OPTICAL
S-VIDEO
ANT IN
TV
Audio cable
Input
Audio left
Audio right
connectors on the HDT100 and the
L
R
0000
.
The Installation menu is displayed:
in the Installation menu and press
SELECT
.
3
Connecting the Antenna and Power Cord
Manufactured under license from Dolby Laboratories.
Dolby and the double -
D symbol are trademarks of Dolby Laboratories.
100~240V AC
50~60 Hz, 2A
RS - 232
To
wall outlet
You can use an outdoor or indoor antenna to receive over-the-air high definition TV signals:
- Connect your antenna's coaxial cable to the
connector on your HDT100.
INPUT AUDIO
ANT IN
- Plug the power cord supplied with your HDT100 into the HDT100's power connector and then plug the cord into a wall outlet.
Now that you've completed hooking up your HDT100, log on to the following website to find the digital TV stations in
your area and view instructions for positioning your antenna:
After visiting the website, proceed to "Auto Scan" below to program your HDT100 with over-the-air digital TV stations.
As each digital TV signal is scanned, you'll see the signal's channel number and program name displayed
on the Program List:
The auto scan will end on channel 69.
6
Press
EXIT
to return to the main menu.
7
Press
EXIT
again to exit the main menu and start enjoying digital TV programs!
If the picture displayed on your TV is too small, use the
A. RATIO
to change the picture size. Use the
V. FORMAT
button to select the desired Video Format to match your TV.
If you have questions, see the HDT100 User Guide or contact the Motorola Customer Support Center at
1-866-668-2271 or 1-866-MOT-BCS1.
HDT100
Y
VIDEO
Pb
L
Pr
R
OPTICAL
S-VIDEO
ANT IN
To
antenna
http://www.antennaweb.org/
(Aspect Ratio) button on your remote control
Advertisement
