Using Pureheat Table - pureHeat Table Owner's Manual

USING PUREHEAT TABLE

READ ALL WARNINGS & CAUTIONS (PAGE 5) BEFORE USING YOUR PUREHEAT TABLE.
Modes
On
To turn the unit on, switch the Mode Button to "
Proximity
pureHeat Table features a Proximity Sensor that will turn the unit on or off
when anyone approaches or leaves the immediate area (2 feet).
Switch the Mode Button to "
front and sides will flash Blue when the unit is in Proximity Mode.
LED Light
Use the LED Power Button to turn the LED Center Light On and Off.
pureHeat Table has an audible warning that will turn on when any part of the unit begins
to overheat. When this occurs, turn the unit off, unplug it from the outlet, and allow it to
cooldown before using it again.
= " for Proximity Mode. The Proximity Sensor on the
8
- " .