Table of Contents
Advertisement
Power Safe (Max Current Switching)
This function limit the maximum current during the operation of air conditioner. It will help to avoid breaker
trips if maximum current reaches the breaker limits.
In summary, this function limit the electrical current during operation.
Note:
– Save function will not be affective under certain operation condition.
– In case of power failure, save mode function will be cancelled. Please set by remote controller again.
– This function will limits the maximum current drawn by air conditioner by reducing the speed of the compressor.
You may feel less cooling performance compare to normal mode. If you feel so, please cancel Power Safe
mode and enter normal Cooling mode.
– When Power Safe is enable, the maximum capacity of Cooling operation will decrease.
– During Power Safe, it is recommended to use Auto Fan Speed.
■ To Start SAVE MODE operation
Press
before operation.
●
1
"
" is displayed on the LCD.
Maximum current is limited to prevent tripping of the circuit
●
breaker during operation.
■ To Cancel SAVE MODE operation
Press
again after operation.
●
SAVE mode operation is stop.
"
" disappears from the LCD."
– 11 –
Advertisement
Table of Contents
