Table of Contents
Advertisement
en Cleaning and servicing
Reattach the water outlet hose and
5.
secure the connection point using
the hose clamp.
17.7 Clean the water inlet fil-
ters.
Emptying the water inlet hose
Turn off the tap.
1.
Set the Algodón/Algodão
2.
gramme.
Start the programme and leave it
3.
to run for approx. 70 seconds.
Switch off the appliance.
4.
Disconnect the appliance's mains
5.
plug from the power supply.
Cleaning the filter on the tap
Note: Please read the information in
the Safety → Page 4 and Preventing
material damage → Page 10 sections
to ensure that you use the appliance
safely.
Requirement: The water inlet hose is
empty.
50
Remove the water inlet hose from
1.
the tap.
Clean the filter with a small brush.
2.
pro-
Connect the water inlet hose and
3.
check for leaks.
Advertisement
Table of Contents
