Test Functions - Panasonic KX-FP362BX Service Manual

KX-FP362BX
Code
853 Top margin
874 DTMFontime
875 DTMFofftime
880 History list
881 Journal 2 list
882 Journal 3 list
6.3.

TEST FUNCTIONS

The codes listed below can be used to perform simple checks of some of the unit's functions. When complaints are received
from customers, they provide an effective tool for identifying the locations and causes of malfunctions. To do this, you set the
Service Mode (Refer to OPERATION (P.47)) first, then operate the below test items.
Test Mode Type of Mode
MOTOR TEST Service Mode
MODEM TEST Service Mode
ROM CHECK Service Mode
SCAN CHECK Service Mode
LCD CHECK Service Mode
DTMF SINGLE TEST Service Mode
KEY CHECK Service Mode
MEMORY CLEAR Service Mode
LED CHECK Service Mode
DIGITAL Service Mode
SPEAKERPHONE
RX & TX CHECK
PRINT TEST Service Mode
PATTERN
Function Set Value
060~200ms
060~200ms
Code
Operation after code
input
"5" "5" "6"
START
"5" "5" "4"
START
"5" "5" "1"
START
"5" "5" "5"
START
"5" "5" "8"
START
"5" "5" "2"
1....ON
2....OFF
"5" "6" "1"
START (any key)
"5" "5" "0"
START
"5" "5" "7"
START
"8" "4" "1"
SPEAKERPHONE
"8" "5" "2"
START
Effective Default
Range
1~9 5
060~200 090
060~200 085
See HISTORY (P.58).
See PRINTOUT EXAMPLE (P.95).
See PRINTOUT EXAMPLE (P.95).
Rotates the transmission and reception motor to check the operation of the
motor.
12: Document feed
24: Recording paper is fed
Press [STOP] button to quit.
Telephone line circuit is connected automatically, output the following signals on
the circuit line.
1)OFF 2)14400bps 3)12000bps 4)9600bps (V17) 5)7200bps(V17)
6)9600bps 7)7200bps 8)4800bps 9)2400bps 10)300bps 11)2100Hz
12)1100Hz
Indicates the version and checks the sum of the ROM.
Turns on the LEDs of the CIS and operates the read systems.
Checks the LCD indication.
Illuminates all the dots to check if they are normal.
Outputs the DTMF as single tones. Used to check the frequencies of the
individual DTMF tones. Refer to DTMF SINGLE TONE TRANSMIT SELECTION
(P.51).
Checks the button operation.
Indicates the button code on the LCD while the button is pressed. Refer to
BUTTON CODE TABLE (P.51).
To reset the value to the default one, except the top margin (#853), time/day
(#001), logo (#002), Fax ID(#003), History, Directory.
Please restart a power supply after clearing a memory.
All LEDs above the operation panel board flash on and off, or are illuminated.
Please refer to DIGITAL SPEAKERPHONE (P.107).
Prints out the test pattern.
Used mainly at the factory to test the print quality.
You can select 1~4. (See PRINT TEST PATTERN (P.52))
50
Remarks
----------
----------
----------
Function