Njoy Alvis Series User Manual page 9

Step 3. Connect the Loads
The AVR-protected receptacles will provide stable power to
connected devices by boosting and bucking the input
power. Therefore simply connect sensitive loads to
AVR-protected receptacles in order to secure them.
3.1 Make sure all appliances are turned "OFF", and put the
POWER SWITCH of AVR to "OFF" position.
3.2 For Alvis 1000 and 2000, plug the appliances into the
OUTPUT SOCKET of the AVR
3.3 For Alvis 3000 and 5000 make wiring connection as
shown in Figure 1.
FIGURE 1
Step 4. Turn On/Off the Unit
Turn on the unit by pressing the power switch to "ON"
position. Then, all connected devices will be powered on.
09
OUTPUT PHASE CABLE
OUTPUT NEUTRAL CABLE
EARTH CABLE
INPUT NEUTRAL CABLE
INPUT PHASE CABLE