Troubles And Solutions - Njoy Alvis Series User Manual

9

Troubles and solutions

Problem/
error code
Power LED is
not ON.
Circuit
breaker
is"tripped".
The unit is
turned off
automatically
and the Power
LED is not lit.
Output Voltage
Output Voltage
14
Possible Cause
Power switch
isn't ON. AC
plug connection
failed. AC socket
without power or
power failure.
The unit is
overload.
The unit is over-
heated. It's in-
ternal protected
function.
Overload protect-
ing when load is
>110%,
but less
than120%
Overload protect-
ing when load is
>120%
Solutions
Check if the mains is normal.
Check if the power cord is
connected firmly.
Check if the connected
devices are connected to the
unit firmly.
Check if the unit is turned on.
Use the below table to solve
the minor problems
Remove some loads first.
Reset the circuit breaker by
pressing the button again.
Remove some loads and wait
until the unit cool down.
Then turn on the unit again.
Remove unnecessary
appliances connected;
if still not solved, contact
the dealer
Remove unnecessary
appliances connected;
if still not solved, contact
the dealer