Glasdon EcoNexus Duo Operator Instruction Leaflet

IMPORTANT NOTE: ENSURE THAT ALL RELEVANT PERSONNEL READ THESE INSTRUCTIONS PRIOR TO USE
OPENING THE ECONEXUS
1.
Using the finger lips, lift the lid up-
wards until it stands upright.
4.
Lower lid to replace, ensuring sacks are
neatly secured underneath.
ATTACHING A SIGN KIT
7.
Align the 2 holes with the threaded holes in the
metal brackets attached to the bin rear. Notes:
Do not place sign holder into cutout slots on bin
rim. Sign can only be fitted at the rear of the bin.
EcoNexus Duo
Operator Instruction Leaflet
SECURING SACK IN POSITION
2.
Central Slot
To install sacks, firstly insert into the central slots
then stretch over the outer rim of bin.
EMPTYING THE ECONEXUS
5.
8.
Arrange the included fixtures as fol-
lows; Screw, Washer, Locking Washer.
Remove Lid.
1
3.
For 50/50 use 2 x 500x1050mm sacks;
For 70/30 use 1 x 500x1050mm & 1 x
610x1720mm sacks.
6.
Release each sack individually from the bin
rim and lift upwards out of the bin body.
9.
Using an allen key, fasten the sign
holder to the bin securely.