Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for LFF LWS125
Summary of Contents for LFF LWS125
- Page 1 WIRELESS WEATHER STATION Ref LWS125 -USER MANUAL-...
-
Page 2: Package List
PACKAGE LIST ITEM NO PART NAME FIGURE WEATHER STATION OUTDOOR SENSOR WIRELESS WEATHER STATION Ref LWS163 USER MANUAL -USER MANUAL- AC-AC ADAPTOR (Output : 5V AC, 0.15A) -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS Please read this user manual carefully before you use this product. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC The lighting flash and The exclamation point arrow head within the within the triangle is a SHOCK DO NOT REMOVE COVER (OR BACK). - Page 4 1 WEATHER STATION UNIT 7 8 9...
-
Page 5: Main Features
Light/Snooze touch buttons on the top (for adjust the backlight) Atmospheric pressure and atmospheric pressure trend animation Weather forecast display Current time display Month & Date Set button Alarm button Weekday button Down/°C/°F/RCC button Max/Min button Channel button Indoor temperature & humidity display Outdoor temperature &... - Page 6 3 OUTDOOR TEMPERATURE & HUMIDITY SENSOR STATION 3.1 MAIN FEATURES • Temperature & Humidity measurement. • Low Battery Indication. 3.2 TX BUTTONS ON THE BACK RF Channel Selection. Battery Compartment for 2 x AAA, 1.5V batteries. 4 FIRST TIME TO USE 4.1 PAIR THE OUTDOOR REMOTE SENSORS First of all, it needs to do the pairing between outdoor remote sensors and weather station.
- Page 7 Note: If no sensors is paired, you can pair the sensors again manually by CHANNEL】 key over 2 seconds. Please refer to pressing and holding the 【 “14 SEARCH FOR OUTDOOR SENSORS”. 2). Slide the switch to CH1/CH2/CH3 of the outdoor sensors correspodingly and insert the batteries.
- Page 8 4). Keep the outdoor sensors 5-10 feet from the weather station. 5). When the RF connection is established, the temperature and humidity readings will appear on the station. 6). After 5 minutes sensors pairing time, the weather station will automatically receive atomic clock signal, the tower icon will be flashing.
- Page 9 8). Put the weather station away from interference, such as electronic devices (TV, computer, microwave, radio, etc.) 9). When the atomic clock signal is received successfully , the time and date will be updated. 10). Allow the outdoor sensors and weather to sit together for 15 minutes to establish a strong connection.
-
Page 10: Time Setting
Normal time display 【 Down/°C/°F/RCC】key During atomic clock reception, press and hold over 2 seconds to exit atomic clock reception. 【 Light/Snooze】and During the RCC receive mode, only the 【 Down/°C/°F/RCC】buttons have a function, other buttons are not functional. If you want to carry out other functions of operation, please press and hold 【... - Page 11 MST, PST, AKT, HAT. Set the Time Zone to your area for the hours to be correct. 【 SET】button 2 seconds entering the settings. RCC ON 1.) Press and hold 【 】and 【 Down/°C/°F/RCC】to set RCC on or flashes. Press off.
- Page 12 【 】or 12.) When Air pressure unit flashes, press 【 Down/°C/°F/RCC】button to select Air Pressure Unit. Press 【 SET】to select Air Pressure value. 【 】or 13.) When Air Pressure value flashes, press 【 Down/°C/°F/RCC】button to adjust the Air Pressure value. Press 【...
-
Page 13: Alarm Clocks
8 ALARM CLOCKS 8.1 CHECK ALARM TIME 【 Alarm】to toggle switch display In Normal time display mode, press Alarm 1 and Alarm 2 time. 8.2 SETTING THE DAILY ALARMS 【 Alarm】over 2 seconds to enter alarm setting mode. Press and hold 【... - Page 14 【 】or • When Hour of Alarm 2 flashes, press 【 Down/°C/°F/RCC】button to set required alarm hours. Press 【 Alarm】to select Minute of Alarm 2. 【 】or • When Minute of Alarm 2 flashes, press 【 Down/°C/°F/RCC】button to set required alarm minutes. Press 【...
-
Page 15: Weather Forecast Function
8.3 DEACTIVATE/ACTIVATE ALARM 【 】to select the Alarm1 and Alarm 2 ON or OFF. • Press the • If the alarm is on, its corresponding alarm icon ( ) will be shown on the display. • Alarm 1 icon is shown on display, it means Alarm 1 is turned on. •... -
Page 16: Barometric Pressure Trend Display
discrepancies between the information from your device and the from the local weather forecasting service, please take the advice of the latter as authoritative. • The weather forecaset is calculated from evaluation of fluctuations in the barometric pressure and may deviate from teh actual weather condtions. •... -
Page 17: Ice Alert
12 ICE ALERT • The ice alert symbol will display and flash when the outdoor temperature at 30.2°F (-1°C) to 37.4°F (+3°C). 13 COMFORT LEVEL There are 3 comfort level indication based on the measured temperature and humidity: The humidity is below 40% Comfort The temperature is at 20-28°C and humidity is at 40-70% The humidity is above 70%... -
Page 18: Low Battery Indication
16 BACKLIGHT • When operating with the power cable, there are 3 levels of brightness for adjustment. 【 Light/Snooze】to adjust backlight. • Press • When operating on batteries only, the backlight will come on shortly (about 【 Light/Snooze】is pressed. 10 seconds) when 17 LOW BATTERY INDICATION •... -
Page 19: Care And Maintenance
metallic items, thick walls, metal surfaces, or other objects that may limit radio communication. • The maximum wireless transmission range must be within 300 feet (100m) in open air, not including walls and floors. 20 CARE AND MAINTENANCE • Do not mix old and new batteries. •... -
Page 20: Fcc Statement
22 FCC STATEMENT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may NOT cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. -
Page 21: Weather Station
WEATHER STATION LWS125 support@lfftech.com Made in China...
Need help?
Do you have a question about the LWS125 and is the answer not in the manual?
Questions and answers
Disable both alarms
To disable both alarms on the LFF LWS-125 Weather Station:
1. Press the Up (9) button to select Alarm 1 and Alarm 2.
2. Toggle each alarm OFF using the same button.
3. Ensure that the corresponding alarm icons are not displayed.
This will deactivate both alarms.
This answer is automatically generated