Memo Feature - Motorola Stature i9 User Manual

NNTN7530A_i9_Nextel_UG_Final_Draft.book Page 118 Friday, December 19, 2008 2:41 PM
3.
Insert the data plug into the COM port of your
laptop or other device.
Make sure no other application is using the COM port
selected.
Make sure the COM port settings of your laptop or
other device are set to the following:
Bits per second: 4800
Data bits: 8
Parity: None
Stop bits: 1
Flow control: Hardware
To set your phone to send location information to your
laptop or other device:
Press /
1.
> Tools > GPS > Interface
2.
Set NMEA OUT to USB or Bluetooth
Note Before you can use your phone to send location
information, you must configure it to send GPS
NMEA information through the charger connector.
Press / > Settings > Connections > USB >
GPS NMEA .
118 9. Tools
Your phone is now sending location data to your
laptop or other device.
To stop sending location data to your laptop or other device:
Set
NMEA OUT
Each time you power your phone on,
automatically set to

Memo Feature

Memo lets you store a number, make a call to that
number, and save it to Contacts.
To create a memo:
Press /
1. > Tools > Memo
.
Enter a number and press r.
2.
.
To view the memo later:
Press /
> Tools > Memo.
To delete the memo:
Press /
1.
> Tools > Memo.
to .
Off
NMEA OUT is
Off .
.