Do you have a question about the CFL-8283 and is the answer not in the manual?
Questions and answers
Sherry Ruth French
April 21, 2025
Does the remote receiver slide in on top of the wires? We can't seem to figure out where it goes.
1 comments:
Mr. Anderson
May 11, 2025
The remote receiver for the Warehouse of Tiffany CFL-8283 connects to the motor wires as follows:
1. Motor green wire to ground wire from outlet box. 2. Motor black wire to remote control black wire. 3. Motor purple wire to remote control purple wire. 4. Motor blue wire to remote control blue wire. 5. Motor white wire to remote control white wire.
Then, place the remote control transmitter into its holder.
The supplier warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a lifetime after the date of purchase by the original purchaser.The supplier also warrants that all other fan parts,excluding any glass or acrylic blades,to be free feom defects in workmanship and material at the time of shipment from the factory for a period of one year after the date of purchase by the original purchaser.We agree to correct such defects without charge or at our option replace with a comparable or superior model if the product is...
HARDWARE INCLUDED NOTE: Hardware not shown to actual size. Blade attachment screw and fiber washer components table Plastic wire nut (not to scale) Blade arm screw and lock washer Pull chain and fob (not to scale) < hand pull chain only> Mounting screws Expansion Bolts Balanced parts package...
Install the shade WARNING:Allow the shatter resistant bowl to � cool completely before removing. CAUTION: Make sure the power is off before attaching or removing the shatter resistant bowl. CAUTION:Do not over tighten the hex nut,overtightening the hex nut may cause the shatter resistant bowl to break.
Page 11
WARN I NG:Make sure the power is off before cleaning your fan. □ Because of the fan's natural movement, some connections may become loose.Check the support connections,brackets,and blade attachments twice a year. Make sure they are secure. It is not necessary to remove the fan from the celling. □...
Page 12
Series general specifications USE AND CARE GUIDE...
Need help?
Do you have a question about the CFL-8283 and is the answer not in the manual?
Questions and answers
Does the remote receiver slide in on top of the wires? We can't seem to figure out where it goes.
The remote receiver for the Warehouse of Tiffany CFL-8283 connects to the motor wires as follows:
1. Motor green wire to ground wire from outlet box.
2. Motor black wire to remote control black wire.
3. Motor purple wire to remote control purple wire.
4. Motor blue wire to remote control blue wire.
5. Motor white wire to remote control white wire.
Then, place the remote control transmitter into its holder.
This answer is automatically generated