Advertisement
Required Electrical Service
One dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device
(RCD).
Blower, Heated
120 V, 15 A, 60 Hz
Surface:
Technical Information
All product dimensions are nominal.
Installation:
Freestanding
Drain location:
Reversible
Basin area, bottom:
51-1/16" x 19-11/16" (1297 mm x 500 mm)
Basin area, top:
58-9/16" x 25-5/16" (1487 mm x 643 mm)
Weight:
105 lbs (47.6 kg)
Minimum floor load:
44.5 lbs/ft² (217.3 kg/m²)
Water depth:
15-1/16" (383 mm)
Water capacity:
65 gal (246.1 L)
Electrical rating:
Blower: 120 V, 15 A, 60 Hz, 300 W
Heated Surface: 120 V, 1.1 A, 60 Hz, 65
W
Pump speed:
Variable
Pump speed:
3-speed
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
www.kohler.com
11-12-2014 01:41
68" FREESTANDING BUBBLEMASSAGE BATH WITH BASK
HEATED SURFACE
No change in measurements if connected
Notes
Measure your actual product for roughing-in
details.
Install this product in accordance with the
installation instructions.
Locate a GFCI-protected 120 V, 15 A, grounded
duplex electrical outlet within 24" (610 mm) of the
bath junction box. A 40" (1016 mm) cable is
included.
Locate the outlet behind the bath and within 24"
(610 mm) of the blower motor.
Remote blower installation kit K-1446 is available
for relocating the blower.
NOTICE: Do not support the load weight of the
bath by the rim.
NOTICE: Confirm adequate support for rim-mount
faucet. Using faucets as a means of support are
not appropriate or safe for this installation.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
ARCHER
K-2595-GW
Advertisement
