Care And Cleaning - Mistral MEM700 Instruction Manual

NOTE: The appliance will enter into
to standby mode after 4 minutes
without operation and Large cup/Small
coffee cup indicator lights will stop
illuminating, pressing of the buttons will
reactivate operation.
NOTE: Coffee quantity of Small cup is
pre-programmed to approximately 45ml
while the coffee quantity of Large cup is
programmed to approximately 75ml.
NOTE: During brewing process, you can
interrupt the coffee brewing process by
pressing your selected coffee button
once. To continue it, just need to press
the button again.
6. During brewing process, both the indicators of
Large cup & Small cup coffee buttons will
flash quickly if there is lack of water in the
water tank. At that time, you must refill the
water tank. Before refill, first press the Power
switch to "OFF" position and then remove the
water tank to refill. After refill, replace the
water tank and make sure that it is placed
in position. Then you can continue to brew
coffee.
7. Once you have finished brewing coffee,
always expel the capsule. Capsules are
automatically expelled into the capsule
collection tray by opening the handle.
CAUTION: Never open the handle during
brewing cycles.
8. If you want another cup, insert a new capsule
before operating.
9. Empty the capsule collection tray and rinse
the unit and tank frequently.
10. Always turn the coffee maker off and
disconnect the power supply when not use.
This machine is only suitable with
Nespresso® or equivalent Coffee
Capsules – do not use other coffee
capsules*
*Nespresso® is a registered trade mark of Societe de Produits Nestle S.A. (Nestle)
This product has no sponsorship, approval, or affiliation with Nestle or its products.

Care and Cleaning

1. Switch off and unplug the Coffee Capsule
Machine from the power outlet.
2. Allow the appliance to cool completely.
3. Wash the water tank, drip tray, capsule
collection tray and cup holder grid in warm
soapy water and dry thoroughly. These parts
are not dishwasher safe.
4. Use a damp cloth to clean the outside of the
unit and dry thoroughly.
5. Replace all parts and keep for next use.
Warning: Do not use abrasive cleaners or
scouring pads. Do not immerse the main
unit, plug and cord in water.
Note: To remove the drip tray, pull it
outwards directly.
6