Before First Use - Mistral MEM700 Instruction Manual

Getting to Know Your
Coffee Capsule Machine
Suitable for use with
Nespresso® or equivalent
Coffee Capsules
Congratulations on the purchase of your new
Coffee Capsule Machine.
Before first using your new Coffee Capsule
Machine, it is most important that you read
and follow the instructions in this use and care
booklet, even if you feel you are familiar with this
type of appliance.
Your attention is drawn particularly to the section
dealing with IMPORTANT SAFEGUARDS. Find a
safe and convenient place to keep this booklet
handy for future reference.
This appliance has been designed to operate
from a standard domestic power outlet. It is not
intended for industrial or commercial use.

Before first use

Remove and safely discard any packaging
material and promotional labels.
Wash the water tank, drip tray, capsule
collection tray and cup holder grid in warm
soapy water and dry thoroughly. These parts are
not dishwasher safe. Use a damp cloth to clean
the outside of the unit.
Check that all accessories are complete and
the unit is not damaged. Add water into water
tank, place a cup on the cup holder grid, insert
the plug into a standard domestic power outlet
and switch on. Turn on the ON/OFF switch and
the indicators of Large cup and Small cup coffee
buttons start to flash, wait until the indicators
light steadily, then press the Large cup or Small
cup coffee button, after a while, the water starts
to flow out from the coffee outlet. Once the
preprogrammed quantity has been reached, the
water will stop. Then discard the water.
Clean all detachable parts thoroughly with warm
water.
NOTE: While pressing down the Large
cup or Small cup coffee button, the
machine may produce a pumping sound,
this is normal. The sound tells you that
water is pumped for brewing coffee.
*Nespresso® is a registered trade mark of Societe de Produits Nestle S.A. (Nestle)
This product has no sponsorship, approval, or affiliation with Nestle or its products.
Using the Coffee
Capsule Machine
Suitable for use with
Nespresso® or equivalent
Coffee Capsules
1. Fill the detachable water tank with cold water.
Take care not fill above the "MAX"or lower the
"MIN" level mark on the tank. Place the water
tank vertically at lock position.
Lock for the water tank
2. Open the handle by lifting it and insert a
Nespresso® or equivalent Coffee Capsules
only. Close the handle by pushing it down
directly.
Note: Never insert your finger into the
capsule holder.
3. Put the power plug into a standard domestic
power outlet and switch on. Turn on the ON/
OFF switch and then both the indicators of
Large cup and Small cup coffee buttons start
to flash.
Caution: During the brewing process,
never open the handle; otherwise the
coffee capsule will be expelled into the
collection tray.
4. Position a cup on the cup holder grid. Make
sure the drip tray is assembled in place.
5. Once the indicators of Large cup & Small cup
coffee buttons light steadily, press the Large
cup or Small cup coffee button according to
your demand, and then its corresponding
indicator starts to flash in blue, after a short
period, coffee will flow out from the coffee
outlet.
Once the desired quantity has been reached,
the coffee will stop flowing out automatically
and the corresponding indicator of your
selected coffee button will light steadily.
5
The water tank at lock position