Motorola iDEN i95cl User Manual page 158

NOTE: Setting the backlight to stay on continuously may decrease the
amount of time you can use your phone before recharging the
battery.
IMPORTANT:
Setting Sensor
The Sensor setting controls your phone's photosensor. The photosensor senses
lighting conditions and turns the keypad backlight on in low light.
When Sensor is set to On, your phone's keypad will be illuminated in low light
conditions. When Sensor is set to Off, it will not.
Adjusting Status Light
The status light is at the top right side of the phone, near the cover hinge. It
illuminates when the phone is on. You can turn the status light feature on or off
using the Status Light option.
Setting Scrolling
You can set your phone to scroll through menus and lists in either of two ways:
• Up/Down — when you reach the bottom or top of a list or menu scrolling
stops until you scroll in the other direction.
• Wrap Around — when you reach the bottom or top of a list or menu,
scrolling "wraps" around and continues at the other end of the lists of
menu.
You can set the scrolling style from the Initial Setup screen using the Scroll
option.
Setting Flip Activation
When Flip Activation is set to On, opening your phone's cover answers
incoming calls and closing the cover ends calls.
When Flip Activation is set to Off, opening or closing your phone's cover does
not answers or ends calls. To answer a call, you must press t on the top of your
phone, or press s or any key on the keypad, or press C under YES. To end a
call, you must press . on the top of your phone or r on the keypad.
150
Setting the backlight to stay on continuously
may degrade backlight brightness over time.
www.motorola.com/iden