Controls; How To Use - Vornado VMH300 Owner's Manual

CONTROLS

POWER ON/OFF
MODE
High Heat (1500 watts)
or Low Heat (750 watts).
8
English

HOW TO USE

Before use, check appliance for visible damage. DO NOT USE THIS HEATER if there is evidence of damage. If any damage is found, contact the
Vornado Authorized Service Center.
POWER INDICATOR LIGHT
1. Use integrated handle on top of
Red light illuminates to
indicate the heater is on.
heater for lifting and carrying.
THERMOSTAT
2. Position heater so airflow is
not obstructed.
3. Unwrap power cord from
storage tray on back of heater.
Plug power cord into standard
grounded wall outlet.
4. Select Mode by turning control
dial. Next, set thermostat to
highest setting by turning
clockwise. When room
reaches desired comfort
level, turn thermostat slowly
counterclockwise until heat
cycles off.
9
English