Advertisement
QUICK START GUIDE
The 90° gearbox can easily be installed upside down by accident,
because it has holes on top and bottom. Refer to Figures 3 & 4 for the
correct orientation. The protruding part of the gearbox faces the drum
unit. The metal cover and clamp are attached to the protruding face.
The shaft with the flexible bellows cover installs over the metal cover
and is set in place using the clamp.
Figure 1: Hardware Identification
A. Retaining clips for 3 point hitch pins
B. Washers for securing PTO covers (8x)
C. Lock washers for gearbox bolts (4x)
D. Bolts for securing PTO covers (8x)
E. Bolts for securing gearbox (4x)
F. Blade change tool
G. Top link pin
2021-1.1
IBEX EQUIPMENT CO
Advertisement
