International Numbers; Accessing Contacts With Gsm Phones - Motorola iDEN i730 User Manual

Contacts
This feature is useful when using voice mail or other
automated phone systems that require you to dial a
phone number and then enter an access number.
To program a pause:
Press and hold * until the letter P appears. The
P represents a 3-second pause.
If you store 17035551235P1234, when you select
this number and make a call, your phone dials the
first 11 digits, pauses for 3 seconds, then dials the
last 4 digits.
If you want a pause longer than 3 seconds, press
and hold * more than once. Each P represents a
3-second pause.
To program a wait:
Press and hold * until the letter W appears. The
W means your phone waits before dialing further.
If you store 17035551235W1234, when you select
this number and make a call, your phone dials the
first 11 digits and then waits. A message appears
asking if you want to send the rest of the digits.
Press A under Yes to dial the last 4 digits.
Tip: You can create pauses and waits while
dialing a number from the keypad. See
"Creating Pauses and Waits While Dialing"
on page 75.
32

International Numbers

Note: This feature may not be offered by your
service provider.
When storing a number that you plan to use for
international calls, use Plus Dialing:
1 Press and hold 0 for two seconds. A "0"
appears, then changes to a "+".
Note: The network translates the "+" into the
appropriate international access code
needed to place the call.
2 Enter the country code, city code or area code,
and phone number.
For information about making international calls, see
"Making International Calls" on page 75.
Accessing Contacts with GSM
Phones
If you plan to use the information stored in Contacts
with an i2000, i2000plus, or any other GSM phone,
you must purchase CompanionPro. Go to
www.motorola.com/idenupdate or your service
provider's web site for more information.
You can use CompanionPro to make the Contacts
information saved to your i730 phone's SIM card
accessible in this type of phone.