Table of Contents
Advertisement
MODEL SERIES
Position Number
F = R-410A Fan Coil Unit
A = Air Conditioning (Cooling Only)
H = Heat Pump
S = Standard Efficiency
072 = 6 Tons (1 circuit)
091 = 7.5 Tons (1 circuit)
120 = 10 Tons (2 circuit)
150 = 12.5 Tons (2 circuit) (FAS units only)
180 = 15 Tons (2 circuit)
K = 208/230-1-60 (available on 6 and 7.5 ton only)
H = 208/230-3-60
M = 460/208/230-3-60
L = 460-3-60
S = 575-3-60
A = Standard Static Standard Efficiency Motor / Standard Drive
• FAS, 6 to 15 ton 208/230v, 460v, 575v-3-60, 6 and 7.5 ton 208/230-1-60, 1-speed;
all 2-speed
B = High Static Standard Efficiency Motor / High Drive
• FAS, 6 to 15 ton 208/230V, 460v, 6 to 10 ton 575v-3-60, 1-speed; all 2-speed
High (Alternate) Static Standard Efficiency Motor / High Drive
• FHS, 6 and 7.5 ton only
High (Alternate) Static High A Efficiency Motor / High Drive
• FHS, 12.5 and 15 ton only
D = Standard Static HIgh Efficiency Motor / Standard Drive
E = High Static High Efficiency Motor / High Drive
• FAS, 15 ton all 3 phase
A = Cu/Al
A = Future Use
0 = Single Speed Indoor Fan Motor
2 = Two Speed Indoor Fan Motor Controller (VFD)
A = Standard - Unpainted
B = Painted cabinet (Gray)
0 = Future Use
A = Standard
NOTES:
1. All FAS072-150 and FHS072-120 units with an "M" voltage designation are triple voltage, i.e., 208/230/460-3-60.
2. For both FAS and FHS models, "M" voltage is not available on 2-speed indoor fan motor options.
3. Single phase FAS072-091 and FHS072-091 units designate standard motor and high static drive.
4. FAS 180 units are also triple voltage in the "M" configuration unless the HIgh Static motor option is used.
FAS-FHS-072-180-01SI Rev. A
F
A
S
0
1
4
2
3
Type
Efficiency
Nominal Tonnage
Fig. 1 — Model Number Nomenclature
Specifications subject to change without notice.
9
1
M
A
A
5
7
6
8
9
Voltage
Fan Motor Options
Painted Cabinet Options
A
0
A
0
A
12
14
10
11
13
Future Use
3
Advertisement
Table of Contents
