Page 3
For more information on SIM card compatibility, go to www.motorola.com/iden/support. Defects or damage to your Motorola phone that result from the use of non-Motorola branded or certified Accessories, including but not limited to replacement housings and or other peripheral accessories, are excluded from warranty coverage.
Page 7
Voice Mail Messages ... 59 Receiving a Message ...59 Accessing Voice Mail from the Message Center ...59 Sending Unanswered Calls to Voice Mail ...59 MOSMS Messages ... 60 Setting Up...60 Receiving a Message ...60 Reading from the Message Center ...61 Creating and Sending Messages ...61 Managing Memory...65 GPS Enabled ...
Page 8
Operational Warnings...89 Operational Cautions...90 Accessory Safety Information...91 MOTOROLA LIMITED WARRANTY ... 93 Limited Warranty Motorola Communication Products (International) ... 97 Patent and Trademark Information ... 101 Index ... 102 Driving Safety Tips ... 107...
Page 9
DECLARATION OF CONFORMITY Per FCC CFR 47 Part 2 Section 2.1077(a) Responsible Party Name: Motorola, Inc. Address: 8000 West Sunrise Boulevard Plantation, FL 33322 USA Phone Number: 1 (800) 453-0920 Hereby declares that the product: Product Name: i315 Model Number: H69XAH6RR1AN Conforms to the following regulations: FCC Part 15, subpart B, section 15.107(a),...
Getting Started volume controls Push-To-Talk (PTT) button speaker (in back) accessory connector antenna Power button. audio jack Navigation key — press the arrows to scroll through menus and lists. Menu key — accesses context-sensitive menus. Option key — selects the option appearing above it on the display.
Getting Started To start using your i315 phone: • Make sure your SIM card is in place. • Charge the battery. • Activate your service. • Enable over-the-air security. Removing the Battery Door 1 Make sure the phone is powered off. 2 Slide the release button forward until it releases the battery door.
Locating Your SIM Card Your SIM (Subscriber Identity Module) card is a small piece of plastic located in the SIM card holder in the back of your phone, underneath the battery. SIM card If your SIM card is not in the SIM card holder, it may be in the box your phone came in, attached to a piece of white plastic about the size of a credit card.
Getting Started 4 If you want to ensure the battery door does not accidentally come off, rotate the circular piece in the center of the release button to lock it. Charging the Battery Your phone comes with a standard travel charger. 1 Plug the charger into an electrical outlet.
Mid-Rate 4 hours Battery Use and Maintenance 6 hours • The Motorola iDEN Approved Lithium Ion chargers provide optimum performance. Other chargers may not fully charge the iDEN Lithium 7.5 hours Ion battery or may yield a reduced number of lifetime charge cycles.
Getting Started Activating Service The first time you power on your phone, you must be in your local calling area. This activates your service. Powering On and Off To power your phone on: Press p. To power your phone off: Press and hold p.
2 Press A under Ok. 3 You are prompted to enable security. Press A under Yes. A series of screens appears. If you subscribe to your service provider’s plan, your home page appears. 4 Press e to return to the idle screen. Phone Programming Within 24 hours of enabling security, you will receive a Net alert containing your Private ID and...
Getting Started • Ckt — Your circuit data number is the number you use if you want to use your phone to transfer circuit data. See “Using Your Phone as a Modem” on page 46. You receive this number from your service provider. Note: The context-sensitive menu under My Info contains information that may be used by your service provider if there is a problem...
2 Press A under Select to see the Settings screen. 3 Scroll to Security. 4 Press A under Select to see the Security screen. Menu Key Many features provide context-sensitive menus that let you access related features and actions. This S icon appears any time a context-sensitive menu is available.
Getting Started MOTOtalk/MT Launch/Exit MOTOtalk Options Access MOTOtalk Setup and Help. See page 21. Status Icons Status icons appear in the two rows at the top of the display. Some appear at all times. Others appear only when your phone is engaged in certain activities or when you have activated certain features.
SIM Card Security Your SIM card protects your personal information. The SIM card stores all your Contacts information. Since this information is stored on your SIM card, not in your phone, you can remove the information by removing your SIM card. Note: Except for making emergency calls, your phone will not function without the SIM card.
Getting Started Turning the PIN Requirement On and When the SIM PIN requirement is on, you are prompted to enter your PIN each time you turn on your phone. Note: If a SIM PIN is required, your phone will not function until the SIM PIN is entered, except for making emergency calls.
Inserting and Removing Your SIM Card Important: Do not touch the gold-colored areas of your SIM card. Switching SIM Cards Moving your SIM card from one phone to another moves all your Contacts information, but erases other information. If you remove your SIM card and use it with another phone, or use another SIM card with your phone, the following information is erased:...
Getting Started Removing Your SIM Card Important: To avoid loss or damage, do not remove your SIM card from your phone unless absolutely necessary. 1 With your phone powered off, remove the battery door and battery. 2 While holding the tab down, slide your SIM card out of the SIM card holder.
Figure out the correct sequence of the icons to solve the puzzle on each level. Accessories To order accessories, log on to our Web site at www.motorola.com/store/iden or contact your Motorola Authorized Retailer. For More Information If you have questions about your i315 phone, contact your sales representative or your service provider.
Making Calls Your i315 phone makes two types of calls: digital cellular phone calls and Private calls. With Private calls, you use your phone as a long-range, digital walkie-talkie. Phone Calls 1 Enter the number you want to call. 2 Press s to place the call. 3 Press e to end the call.
2 Press and hold the PTT button on the side of your phone. Begin talking after your phone emits a chirping sound. 3 Release the PTT button to listen. Call Icons When you make a call, call icons appear in the text area of the phone’s display.
Making Calls To select a number from the recent calls list as the number you want to call: 1 From the idle screen, scroll down. -or- From the main menu, select Recent Calls. 2 Scroll to the name or number you want to call. From Contacts If you have numbers stored in Contacts, you can use these numbers to make calls.
Using a Voice Name Note: This is an optional feature. Contact your service provider about its availability for purchase. If you have created a voice name in Contacts for the number you want to call, you can say the voice name into your phone to enter the number.
Making Calls To turn speakerphone on or off: Press under A under Spkr. -or- Press t. Using Mute Muting calls lets you listen to incoming sound without transmitting sound. Mute is available whenever you are on an active call. To turn mute on: Press A under Mute.
MOTOtalk MOTOtalk allows direct two-way phone-to-phone communications between two or more phones equipped for MOTOtalk. You can make and receive MOTOtalk calls even when network service is not available. You can talk to anyone on your code and channel within your range. MOTOtalk allows you to: •...
MOTOtalk Exiting MOTOtalk To set your phone to network mode when MOTOtalk is active: 1 From the MOTOtalk idle screen, press m. 2 Scroll to MT Options and press A under Select. 3 Select Exit MOTOtalk. Switching to Network Please Wait displays. After a few seconds, the network idle screen appears.
Page 33
Making and Receiving Code Calls in MOTOtalk To make a code call in MOTOtalk: 1 Press and hold the PTT button. MT Transmit appears on the first line of display. Begin speaking after your phone emits the MOTOtalk tone. 2 Release the PTT button to listen. The tone emitted from your phone when using MOTOtalk is 4 beeps and sounds different from the standard tone heard with on-network Private and...
MOTOtalk Private MOTOtalk Calls You can have a private conversation with another person using MOTOtalk. When on a private MOTOtalk call, no other parties can hear your conversation. In order to make a private MOTOtalk Call, you must use the valid 10-digit Personal Telephone Number (PTN) of the person you are calling.
Ending a private MOTOtalk Call A private MOTOtalk call will end if there is no communication for 6 seconds. Note: A private MOTOtalk call may be interrupted during the 6 second idle time by another code call or private call. The display will return to the MOTOtalk idle screen.
Page 36
MOTOtalk To turn off Direct Launch: 1 From the Setup screen, scroll to Direct Launch and press A under Change. 2 Select Off. Your phone now displays MT Options when you select MOTOtalk from the main menu. Using State Tone To set your phone to notify you with a tone that you are in MOTOtalk: 1 From the Setup screen, scroll to State Tone and...
Call Alerts Sending a call alert lets the recipient know you want to talk to him or her on a Private call. When you send a call alert, the recipient’s phone emits a series of beeps, or vibrates, and displays your name or Private ID.
Page 38
Call Alerts Viewing Date and Time To view the date and time a call alert was received: 1 From the main menu, select Call Alert. 2 Scroll to the call alert you want information on. 3 Press m. 4 Select View. Responding to Call Alerts in the Queue After you queue a call alert, you can respond to it...
Recent Calls The recent calls list stores the numbers of the 20 most recent calls you have made and received. To view the recent calls list: 1 From the idle screen, press the down arrow on the navigation key. -or- From the main menu, select Recent Calls.
Recent Calls 3 To store the number as a new entry, select [New Contact]. -or- To store the number to an existing entry, select the entry. 4 With the Contacts type field highlighted, scroll left or right to display the Contacts type you want to assign to the number.
Contacts Contacts stores up to 600 numbers or addresses. Each Contacts entry can store several numbers or addresses. Information stored in Contacts is saved on your SIM card. A Contacts entry contains: • A name — A name is required if you are storing more than one number or address to the entry;...
Contacts • A Speed Dial number — When you store a phone number, it is assigned a Speed Dial number. You can accept the default Speed Dial number or change it. • A voice name — If you create a voice name for a number, you can then dial that number by saying the voice name into your phone.
3 With Prvt/Grp highlighted, press A under Select. To set Contacts to show all entries: 1 From the Contacts list, press m. 2 Select Filter. 3 With Show All highlighted, press A under Select. Creating Entries A number or address and a Contacts type are required for all Contacts entries.
Contacts Enter the number or address. For phone numbers, use the 10-digit format. For email addresses, see “Entering Text” on page 54. Tip: Press A under Browse to select a number or address from Contacts, the recent calls list, or Memo. When you are finished, press A under Ok.
To store numbers to Contacts from the idle screen: 1 Use the keypad to enter the number you want to store. 2 Press m. 3 Select Store Number. 4 To store the number as a new entry, select [New Contact]. -or- To store the number to an existing entry, select the entry.
Contacts Checking Capacity To see how many numbers are stored in Contacts: 1 From the Contacts list, press m. 2 Select Capacity. Creating Pauses and Waits When storing a number, you can program your phone to pause or wait between digits while dialing.
If you plan to use the information stored in Contacts with an i2000, i2000plus, or any other GSM phone, download iDEN Phonebook Manager. Go to idenphones.motorola.com/iden/support for more information. You can use iDEN Phonebook Manager to make the Contacts information saved to your i315...
Call Forwarding Call forwarding sends calls to the phone numbers you specify. You can forward all calls to one number or forward missed calls to different numbers depending on the reason you missed the call. You can forward phone lines 1 and 2 independently.
Tip: In some fields, you can select an option by scrolling left or right instead of pressing A under Change. Turning Off Call Forwarding If you don’t want all your calls forwarded, turn the feature off: 1 From the main menu, select Call Forward. 2 Press A under Change.
Call Forwarding Press A under Search. Select Contacts, Recent Calls, or Memo. Select the number you want to enter. 8 Press A under Ok. 9 Repeat step 4 through step 8 for If No Answer and If Unreachable. When you are finished, press A under Back. Viewing Call Forwarding Settings 1 From the main menu, select Call Forward.
Advanced Calling Features Call Waiting Call Waiting lets you receive a second call while on an active call. Call Waiting is always available, unless you turn it off for a specific call. If you are on a call and receive a second call, your phone emits a tone and displays a message saying you are receiving a second call.
Advanced Calling Features To turn off Call Waiting for the next call you make or receive: 1 From the main menu, select Settings > Phone Calls > Call Waiting. 2 Press A under Change. 3 Scroll to Off. 4 Press A under Select. Call Waiting is turned back on when you end the call.
7 Press A under Select. Both calls are now active and appear on the display. Creating Pauses and Waits While Dialing You can enter a pause or wait while dialing a number. For more information on pauses and waits, see “Creating Pauses and Waits” on page To create a pause while dialing a phone number: 1 From the keypad, enter the digits you want to occur before the pause.
Advanced Calling Features To set your phone to call a Private ID you choose: 1 From the main menu, select Settings > 2-Way Radio > One Touch PTT > Assigned Number. 2 To enter the Private ID you want your phone to call every time you press the PTT button: Enter the number using your keypad.
2 Proceed as if making a Private call. Receiving Group Calls To answer a group call: Proceed as if answering a Private call. Only one person at a time may speak on a group call. The Private ID or name of the person who is speaking will appear on the display below the Talkgroup number.
Advanced Calling Features • Prvt/Grp Reset — keeps a running total of all of your Private and group call minutes, until you reset it. • Prvt/Grp Lifetime — displays the total minutes of all your Private and group calls. • Circuit Reset — keeps a running total of all of your circuit data use, until you reset it.
Page 57
2 With the phone’s display facing up, insert a data cable’s connector into the accessory connector, until you hear a click. 3 Insert the data plug into the COM port of the other device. When used as a modem, your phone has these data transfer modes: •...
Page 58
Advanced Calling Features Choosing a Mode Your phone supports these TTY modes: • TTY — You type and read text on your TTY device. • VCO (Voice-Carry-Over) — You speak into your phone and read text replies on your TTY device. •...
Memo Memo lets you store a number, make a call to that number, and save it to Contacts. To create a memo: 1 From the main menu, select Memo. 2 Enter the number using your keypad. 3 Press A under Store. To view the memo later: 1 From the main menu, select Memo.
Ring Tones To set the ring tone your phone makes when you receive phone calls, message notifications, or call alerts: 1 From the main menu, select Ring Tones. 2 Make sure VibeAll or SilentAll is set to Off. 3 Scroll through the list of ring tones and select the one you want to assign.
Never Ring 1 From the main menu, select Ring Tones > SilentAll. 2 Scroll left or right to set SilentAll to On. Always Vibrate Instead of Ringing If your phone includes a vibrate feature: 1 From the main menu, select Ring Tones > VibeAll.
If you want to use other ring tones, you can download them into your phone for a fee. Go to www.motorola.com/idenupdate for a selection of custom ring tones and downloading instructions. Note: Ring tones may be downloaded only once.
Note: Ring tones are stored in your phone using the same memory space used to store voice records. Deleting voice records frees memory space for ring tones. Deleting Custom Ring Tones To delete a custom ring tone: 1 From the main menu, select Ring Tones. 2 Make sure VibeAll or SilentAll is set to Off.
Entering Text You can enter text into your phone using the traditional method of pressing a key several times for each character, or by pressing a key once for each letter while words likely to be the one you want are chosen from a database. You can also enter symbols and numbers into a text field.
2 Type a word by pressing one key for each letter. For example, to type “test” press 8 3 7 The displayed word may change as you type it. Do not try to correct the word as you go. Type to the end of the word before editing.
Entering Text These icons appear in the top row of your display: Shift is on. Caps lock is on. When neither of these icons appear, letters typed are lowercase. Note: Your phone automatically makes the first letter of a sentence uppercase. Punctuation Press 1 or 0 to insert punctuation.
Messages You can receive the following types of messages on your phone: • Voice mail messages • Short Message Service (SMS) text messages • Depending on your service provider, you may have the option to receive fax mail and Net alerts.
Messages Message Center The message center manages your messages. All your messages are stored in the message center. The message center shows how many messages you have of each type. To access your messages through the message center: 1 Press A under Mesgs. -or- From the main menu, select Messages.
Voice Mail Messages Note: To receive voice mail messages, you must first set up a voice mail account with your service provider. Receiving a Message When you receive a voice mail message, New Voice Mail Message appears on the display. To call your service provider’s voice mail system and listen to the message: Press A under Call.
MOSMS Messages Note: This feature may not be offered by your service provider. If your service provider offers MOSMS, your phone sends SMS messages using MOSMS and receives SMS messages from other phones that are using MOSMS. Setting Up Before you begin using MOSMS, you may need to set up your signature, service center number, and expiration information: 1 From the main menu, select Messages.
To delete the message, scroll to the end of the message and press A under Delete. To dismiss the message notification: Press A under Exit. This icon w appears on the display, reminding you that you have a new message. If your phone is powered off when you receive a text message, your phone notifies you the next time you power it on.
MOSMS Messages under Select. For more information on quick notes, see “Using Quick Notes” on page 63. If you want to add your signature: Press m. Select Add Signature. When you are finished, press A under Ok. 5 If you want to send the message, press A under Yes.
3 Select Compose SMS. The message is automatically addressed to the phone number you chose. 4 Follow step 4 through step 8 of “Creating and Sending Messages” on page 61. Using Quick Notes Quick notes are short, pre-written text messages that you can create, edit, and send.
MOSMS Messages These icons appear next to messages in the outbox: Sent and confirmed. Send attempted. Forwarded. Received by addressee. Not received by addressee. Send failed. Re-sent. Locked. Resending Messages To resend a message: 1 From the main menu, select Messages > Text Outbox.
Scroll to Unlock to unlock the message. 5 Press A under Select. Managing Memory Your text inbox, outbox, and drafts folder have a set amount of memory available for storing messages. The text inbox holds 20 messages. If the text inbox is full, you cannot receive messages until you delete some.
GPS Enabled Your phone’s GPS Enabled feature uses information from Global Positioning System (GPS) satellites orbiting the Earth to determine the approximate geographical location of your phone, expressed as latitude and longitude. The availability and accuracy of this location information (and the amount of time that it takes to calculate it) will vary depending on the environment in which you are using the GPS feature.
• When your GPS antenna is covered (for example, by your hand or other object) or facing the ground • In temperature extremes outside the operating limits of your phone Walking or driving very slowly may also substantially reduce GPS performance. Even where location information can be calculated in such situations, it may take much longer to do so, and your location estimate may...
GPS Enabled GPS satellite signals and network assist data, it may take 30 seconds or more to determine the approximate location. This time will increase where there is reduced access to satellite signals. When your approximate location is determined, it is made available to the appropriate emergency response center.
• The number of satellites used to calculate the location. In general, more satellites make for better accuracy. To calculate your location again: Press A under Rfrsh. It may take your phone several minutes to complete the process of determining your location. During this time, a message usually appears on your phone’s display saying your phone is scanning for satellites.
Page 80
GPS Enabled • Stay in the open. The GPS feature works best where there is nothing between your phone and a large amount of open sky. If possible, go outside, away from tall buildings and foliage. While performance in a building is improved by moving closer to windows, glass with certain sun shielding films may block satellite signals.
Updating Satellite Almanac Data Another way to keep the GPS feature of your phone working well is to keep your satellite almanac data up to date. The United States government maintains an almanac of data about where GPS satellites are as they orbit the Earth.
GPS Enabled To set your GPS privacy options: 1 From the main menu, select GPS > Privacy. 2 If your GPS PIN security feature is enabled, enter your GPS PIN. (See “Setting the GPS PIN Security Feature” for more information.) 3 Scroll to the privacy setting you want.
Page 83
location to the device running the map software, which displays your location on a map. Your phone provides an updated location every second and the map software displays your changing location on its map. See “Enhancing GPS Performance” on page 69 for more details on obtaining good location information.
Page 84
GPS Enabled 3 Insert the data plug into the COM port of your laptop or other device. Make sure no other application is using the COM port selected. Make sure the COM port settings of your laptop or other device are set to the following: •...
Voice Records Note: This is an optional feature. Contact your service provider about its availability for purchase. A voice record is a recording you make with your phone and can play back. You can record notes to yourself or phone calls. Your phone can store up to 20 voice records.
Voice Records Labeling Voice Records When you create a voice record, it is labeled with the time and date it was recorded. You can then rename it with a custom label. 1 From the main menu, select VoiceRecord. 2 Scroll to the voice record you want to label. 3 Press m.
Page 87
To free more memory by deleting all unlocked voice records: 1 From the voice records memory screen, press A under Delete. 2 Press A under Yes to confirm. Note: Voice records are stored in your phone using the same memory space used to store messages, Java application data, and ring tones.
Customizing Your Phone Setting the Volume To set the volume of the sound coming from the phone’s earpiece or speaker: 1 From the main menu, select Settings > Volume. 2 Scroll to Earpiece to set the earpiece volume. -or- Scroll to Speaker to set the speaker volume. 3 Press A under Change.
If your phone does not include a vibrate feature, you can still set your phone to make no sound. Scroll to Silent in step 3. Seeing the Display Better To set the contrast of the display: 1 From the main menu, select Settings > Display/Info >...
Customizing Your Phone • TTY — lets you use your phone with a TTY device. See “To use these services, you must install the iDEN Wireless Data Services software (available separately). Making TTY Calls” on page 47. • Notifications — See “Message Notifications” on page 57.
• SIM PIN — enables and disables your phone’s SIM PIN security feature. See “Turning the PIN Requirement On and Off” on page 12. • GPS PIN — enables and disables your phone’s GPS PIN security feature. See “Setting the GPS PIN Security Feature”...
Using a Headset If you use a headset or similar device with your phone, you can set your phone to send incoming sound to the headset only, or to the headset and the speaker at the same time: 1 From the main menu, select Settings > Advanced >...
Understanding Status Messages You may receive status messages under certain conditions. Before contacting Customer Care, note the message, numeric code, and the conditions under which it appeared. The following table lists and describes the status messages. Status Messages Message Description The number that you entered is not Number Not in valid.
Page 94
Understanding Status Messages Status Messages Message Description Please enter your 4- to 8- digit SIM Enter SIM PIN PIN code. Enter Unlock Code Auto Phone Lock is activated. Enter you unlock code. Warns of low memory for Net New Browser Alerts.
Portable Radio Product Operation and EME Exposure Your Motorola radio product is designed to comply with the following national and international standards and guidelines regarding exposure of human beings to radio frequency electromagnetic energy (EME): •...
“IN USE”. Holding the antenna affects call quality and may cause the radio product to operate at a higher power level than needed. Approved Accessories For a list of approved Motorola accessories call 1-800-453-0920, or visit our website at www.motorola.com/iden.
Page 97
The SAR information reported to the FCC includes the FCC-accepted Motorola testing protocol, assessment procedure, and measurement uncertainty range for this product.
Safety and General Information Electro Magnetic Interference/Compatibility Note: Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed or otherwise configured for electromagnetic compatibility. Facilities To avoid electromagnetic interference and/or compatibility conflicts, turn off your radio product in any facility where posted notices instruct you to do so.
Other Medical Devices If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information. Use While Driving Check the laws and regulations on the use of radio products in the area where you drive.
Safety and General Information as grain, dust or metal powders, and any other area where you would normally be advised to turn off your vehicle engine. Areas with potentially explosive atmospheres are often but not always posted. Blasting Caps and Areas To avoid possible interference with blasting operations, turn off your radio product when you are near electrical blasting caps, in a blasting area,...
Clean the external surfaces of the radio product with a damp cloth, using a mild solution of dishwashing detergent and water. Some household cleaners may contain chemicals that could seriously damage the radio product. Avoid the use of any petroleum-based solvent cleaners. Also, avoid applying liquids directly on the radio product.
Page 102
Safety and General Information • The cord size is 18AWG for lengths up to 100 feet and 16AWG for lengths up to 150 feet. • Do not operate any battery charger if it has received a sharp blow, has been dropped, or has been damaged in any way;...
PURCHASED IN THE UNITED STATES OR CANADA What Does this Warranty Cover? Subject to the exclusions contained below, Motorola, Inc. warrants its Motorola iDEN Digital Mobile and Portable Handsets ("Products"), Motorola-branded or certified accessories sold for use with these Products ("Accessories") and...
Page 104
(c) use of the Products or Accessories for commercial purposes or subjecting the Product or Accessory to abnormal usage or conditions; or (d) other acts which are not the fault of Motorola, are excluded from coverage. Use of Non-Motorola Products and Accessories.
Page 105
Who is covered? This warranty extends only to the first consumer purchaser, and is not transferable. What will Motorola Do? Motorola, at its option, will at no charge repair, replace or refund the purchase price of any Products, Accessories or Software that does not conform to this warranty.
Page 106
Motorola software. Motorola software may only be copied into, used in, and redistributed with, the Products associated with such Motorola software. No other use, including without limitation disassembly of such Motorola software or exercise of the exclusive rights reserved for Motorola, is permitted.
80% of rated capacity, or b. the battery develops leakage. MOTOROLA, at its option, will at no charge either repair the Product (with new or reconditioned parts), replace it (with a new or reconditioned...
Page 108
Limited Warranty Motorola Communication Products (International) MOTOROLA cannot be responsible in any way for any ancillary equipment not furnished by MOTOROLA which is attached to or used in connection with the Product, or for operation of the Product with any ancillary equipment, and all such equipment if expressly excluded from this warranty.
Page 109
Product or parts infringe a patent, and Motorola will pay those costs and damages finally awarded against the end user purchaser in any such suit which are...
Page 110
Product or parts as established by MOTOROLA. MOTOROLA will have no liability with respect to any claim of patent infringement which is based upon the combination of the Product or parts...
• Get to know your Motorola wireless phone and its features such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road.
Page 118
Driving Safety Tips • Your phone can perform many other functions besides allowing you to make and receive calls. Do not let these features distract you from driving. Use them only when it is safe to do so. • Use your wireless phone to call for help. Dial 9-1-1 or other local emergency number in the case of fire, traffic accident or medical emergencies.