Podab ProLine TS 63 E Installation And Operation Manual
Drying cabinet
Hide thumbs
Also See for ProLine TS 63 E:
- Service manual and spare parts list (12 pages) ,
- Installation and operation manual (32 pages)
Related Manuals for Podab ProLine TS 63 E
Summary of Contents for Podab ProLine TS 63 E
- Page 1 Only use appliance after first reading these instructions! Installation and Operation Manual Drying Cabinet ProLine TS 63 E...
- Page 2 ©PODAB Group 2022...
- Page 3 Dear Customer We are pleased that you have chosen a PODAB drying cabinet. Sparing use of energy and short drying times help to ensure that you can use your drying cabinet as economically as possible. Your new drying cabinet is the result of many years of develop- ment work.
-
Page 4: Table Of Contents
Ventilation channel – design Evacuated amount of air and pressure fall User manual Automatic programs Select drying time manually Gentle drying Maintenance Take good care of the cabinet Ventilation system Keep your cabinet efficient and economical Notes ©PODAB Group 2022... -
Page 5: Safety Regulations
IMPORTANT: to inform the reader of special steps that must be taken in order to prevent injuries on the cabinet. NOTE: to inform what is important to know, but it cannot cause personal injuries or injury on the cabinet. ©PODAB Group 2022... -
Page 6: Important Safety Instructions
17. Never try to manipulate or connect past any safety func- tions. 18. If the cabinet isn’t assembled after the manufacturer’s in- structions, there is a risk that the cabinet can cause per- sonal injuries or injuries on property. ©PODAB Group 2022... -
Page 7: Specification
Specification Dimensions 1200 1855 A = Electrical connection B= Exhaust ©PODAB Group 2022... -
Page 8: Technical Information
43% residual moisture. Dried to 0% residual moisture. Electrical connection - standard 208-240 V, 3P, 60Hz Breaker, A, 3P Heating effect, kW Total effect, kW Electrical connection - optional 208-240 V, 1P, 60Hz Breaker, A, 1P Heating effect, kW Total effect, kW ©PODAB Group 2022... -
Page 9: Assembly Instructions
You need the following tools to easily install the drying cabinet: (If the cabinet is already assembled please go to page 21) • Cordless screwdriver • Wrench • Hex key 3 and 5 mm • Level • Torx screwdriver bit no. 25 ©PODAB Group 2022... - Page 10 ©PODAB Group 2022...
- Page 11 Note! Only for cabinets with hang- ing frame. ©PODAB Group 2022...
- Page 12 Note! Only for cabinets with hanging frame ©PODAB Group 2022...
- Page 13 ©PODAB Group 2022...
- Page 14 Note! Only for cabinets with hanging frame ©PODAB Group 2022...
- Page 15 ©PODAB Group 2022...
- Page 16 ©PODAB Group 2022...
- Page 17 Connect the cables Light (LIGHT) Relay board Humidity sensor (HUMIDITY) Control board Temp sensor (NTC1) Relay board (X11) Door switch (DOOR) ©PODAB Group 2022...
- Page 18 Note! Only for cabinets with hanging frame ©PODAB Group 2022...
- Page 19 Note! Only for cabinets with hanging frame Note! Only for cabinets with single rack bar Note! Only for cabinets with single rack bar ©PODAB Group 2022...
- Page 20 Note! Only for cabinets with single rack bar ©PODAB Group 2022...
-
Page 21: Installation Of The Cabinet
CAUTION There must be two persons to lift the top in a safe way. Don’t try to do it on your own, the weight is 30 kg / 66 lbs! Lift the top off. ©PODAB Group 2022... -
Page 22: Step 2: Fasten The Cabinet To The Wall
NOTE: If the cabinet is not connected according to these recommendations, the warranty is no longer valid. NOTE: Please control that the cabinet is leveled and cannot be tilted. ©PODAB Group 2022... -
Page 23: Step 4: Connect The Drying Cabinet To The Main Switch
Do not connect the ground to the neutral (N) leg at the terminal strip (if so equipped). If the outgoing air channel does not get warm, go back to step 4 and control that the electrical connection is installed correctly. ©PODAB Group 2022... -
Page 24: Turn The Hanging Frame
Loosen the three bolts, the upper stearing tap and nut and the five torx screws which hold the plate and which sup- port the stop plate. The drawings below shows where these parts are. hanging levels. Support plate ©PODAB Group 2022... -
Page 25: Adjust The Rotary Inertia Of The Hanging Frame
At the top of the hanging frame pole there is a bolt for adjusting the rotary inertia. If the hanging frame rotates with insufficient resistance the bolt can be tightened. ©PODAB Group 2022... -
Page 26: Requirements For Ventilation
We recomend the incoming air flow to the room to be greater than the evacuated amount. If the cabinet is placed in a room where the incoming air is not enough, we recommend that you install an air exchanger. ©PODAB Group 2022... -
Page 27: Evacuated Amount Of Air And Pressure Fall
NOTE: If the highest allowed level of air pressure is ex- ceeded an external fan could be needed. Otherwise the dry- ing result is effected negatively. TS 63 E is prepared for an external fan. Contact your local dealer or PODAB for more information. ©PODAB Group 2022... -
Page 28: User Manual
If a program is interrupted before the cool down has finished, For delicate fabrics and synthetics gentle drying should be used. the inside of the drum could be very hot. The temperature is reduced. Activate gentle drying mode by pushing button 3 during program select. ©PODAB Group 2022... -
Page 29: Maintenance
Keep your cabinet efficient and economi- • The ventilation channels shall be as short as possible. • If possible, dry the same type of textiles at the same time. ©PODAB Group 2022... -
Page 30: Notes
Notes ©PODAB Group 2022... - Page 31 ©PODAB Group 2022...
- Page 32 SERVICE/SUPPORT Email: support@podab.us www.podab.us PODAB Group, 1330 Main Street , Floor 2 Sarasota, FL 34236, USA info@podab.us www.podab.us +1 (800) 683-4873 Copyright © 2022 PODAB Group, All rights reserved. Product Number: 131032 Subject to change without notice.
Need help?
Do you have a question about the ProLine TS 63 E and is the answer not in the manual?
Questions and answers