Related Manuals for TouchStar TS2020
Summary of Contents for TouchStar TS2020
- Page 1 TS2020 WITH IEVO INSTALL GUIDE PRODUCT INFORMATION SHEET INF115-04 www.touchstar-atc.com support@touchstar.co.uk...
- Page 2 TS2020. When you power on the TS2020 it will require commissioning to communicate with their software. This will involve setting the Terminal ID and IP address (by default the TS2020 is set to DHCP so should acquire network credentials automatically).
- Page 3 To set the Terminal ID press and hold the C button on the display for approx. 5 seconds to enter Diagnostic Mode (press & hold the minutes on the display for approx. 5 seconds if the TS2020 has already acquired its configuration).
- Page 4 TESTING THE IEVO READER & TS2020 Once a user has been set up in the application (Evolution or ievo standalone) you should be able to select Diagnostic Test 2 on the TS2020 and swipe an enrolled finger on the ievo reader. www.touchstar-atc.com...
Need help?
Do you have a question about the TS2020 and is the answer not in the manual?
Questions and answers