Download Print this page

TouchStar Nohmad Manual

Gprs terminal, fingerprint (placement) enrolment

Advertisement

Quick Links

Nohmad Fingerprint Enrolment
Prompt for Verification placements:
During verification, left-hand 2 digits show number of good
placements, right-hand 2 digits show total number of place-
ments (good & bad):
As soon as the required number of good placements is
reached, the Nohmad
Nohmad
Nohmad sends the results to the Server, and
Nohmad
starts scrolling a single dot across the display while it awaits
the Servers response:
If the server accepts the results, the last 4 digits of the new ID
are displayed:
If the server rejects the results, the digits are blanked and just
the 4 dots are lit. This is the indication that the Enrolment
failed and, again, that the Nohmad
Nohmad is now ready for another.
Nohmad
Nohmad
www.touchstar-atc.com
5
Nohmad Fingerprint Enrolment
FINGER
POSITIONING...It is essential that the position of the
finger or fingers is constant. This is most easily maintained by
mounting the Nohmad
Nohmad at a height whereby easy and comforta-
Nohmad
Nohmad
ble placing of the finger is possible.
The finger should be completely flat and straight against the
reading platen.
www.touchstar-atc.com
6
NOHMAD GPRS TERMINAL
FINGERPRINT (PLACEMENT) ENROLMENT GUIDE
SEPTEMBER 2016
MAN063-04

Advertisement

loading
Need help?

Need help?

Do you have a question about the Nohmad and is the answer not in the manual?

Questions and answers

Summary of Contents for TouchStar Nohmad

  • Page 1 finger or fingers is constant. This is most easily maintained by mounting the Nohmad Nohmad Nohmad at a height whereby easy and comforta- Nohmad ble placing of the finger is possible. The finger should be completely flat and straight against the reading platen.
  • Page 2 This score is below 100: Nohmad Nohmad ENROLLING A USER GPRS Fingerprint terminal. To ensure you get the best from either via software or at the Nohmad Nohmad Nohmad Nohmad itself by a designated this product, some careful system configuration is required.