Advertisement
Quick Links
PGM-40 MECHANICAL
CONTROL HANDLE
Thoroughly read and understand this manual before
installing, operating or servicing this equipment.
OPERATION, INSTALLATION,
MAINTENANCE AND REPAIR GUIDE
SERVICE BULLETIN SB3022
Rev. H 11/09
Model #3330-037
3330-038
3330-039
3330-040
3330-041
3330-042
3330-060
3330-061
®
Advertisement
Related Manuals for Balcrank PGM-40
Summary of Contents for Balcrank PGM-40
- Page 1 SERVICE BULLETIN SB3022 Rev. H 11/09 ® PGM-40 MECHANICAL CONTROL HANDLE Model #3330-037 3330-038 3330-039 3330-040 3330-041 3330-042 3330-060 3330-061 Thoroughly read and understand this manual before installing, operating or servicing this equipment. OPERATION, INSTALLATION, MAINTENANCE AND REPAIR GUIDE...
- Page 2 • Do not strike the oil control gun if it fails noise hazards. to operate. Refer to the “trouble shooting Wear ear and eye protection. guide” or return unit to your nearest Balcrank authorized service center. • Never allow any part of the human body WARNING to come in contact with the control handle outlet.
-
Page 3: Specifications
The outlet extension can be fitted either inline This manual assists you in operating and maintaining (forward) or on the outlet port “pistol style” located your new PGM-40 Mechanical Control Handle. The under the meter. information contained will help you ensure many... -
Page 4: Module Replacement
HANDLE REASSEMBLY B) Remove gear (17), E-clip (18), washer (19), o-ring (20), and shaft (16) from the underside A) Clean and inspect all parts. Replace any suspect, of register housing. worn, or damaged components. NOTE: Use all new parts when reassembling the NOTE: Lightly lubricate the valve cam (30) before gear and shaft assembly. - Page 5 PGM-40 Mechanical Control Handle Parts List ITEM PART NO. QTY. IN KIT DESCRIPTION Compression Fitting Olive Adapter Control Handle Body O-Ring Roto Shafts 3/8” Plug Oval Gear Oval Gear and Piston Gearbox Housing O-Ring Middle Shaft Q1 Quart Gear Q2 Quart Gear...
- Page 6 PGM-40 Mechanical Control Handle Parts Diagram WARNING Manual tip cannot be used on PGM-40 control handle. An auto tip or semi-auto tip must be used. Use of manual tip can result in overpressurization, which can cause control handle to crack.
- Page 7 Extensions Outlet Model Nozzle / Tip Before 5/03 After 5/03 Extensions Number 3/8” NPT 3/8” NPS 829648 831471 3330-037 Qt. plus seal- Rigid 3332-086 3330-040 Lt. ing nut 831470 3330-038 Qt. 829973 831469* Flex 3332-086 3330-041 Lt. 3330-039 Qt. 830276 831429* Flex 90 3332-086...
- Page 8 For Warranty Information Visit: www.balcrank.com Balcrank Corporation ® Weaverville, NC 28787 800-747-5300 800-763-0840 Fax www.balcrank.com SERVICE BULLETIN SB3022 Rev. H 11/09...