Table of Contents
Advertisement
Connect new devices
Note:
This feature requires an optional accessory.
To connect with a new device, you need to pair with it.
You only need to do this once for each device—to
connect again, just turn on the device.
1
Make sure the device you are pairing with is in
discoverable mode.
Note:
Refer to the guide that came with the device
for details.
Settings
2
Touch Menu
>
Bluetooth settings
>
Bluetooth
3
Touch
to turn on and scan. If Bluetooth
power is already on, touch
4
Touch a device to connect.
OK
5
If necessary, touch
0000
(like
) to connect to the device. When the
device is connected, the Bluetooth indicator
appears in the status bar.
Note:
Using a mobile device or accessory while
driving may cause distraction and may be illegal.
Always obey the laws and drive safely.
Reconnect devices
To automatically reconnect your phone with a paired
device, simply turn on the device.
Wireless controls
>
.
Scan for devices
.
, or enter the device passkey
To manually reconnect your phone with a paired
device, touch the device name in the
devices
list.
Disconnect devices
To automatically disconnect your phone from a paired
device, simply turn off the device.
To manually disconnect your phone from a paired
device, touch the device name in the devices list, then
Disconnect
touch Menu
>
Edit properties
Settings
Touch Menu
>
Bluetooth settings
>
>
OK
and touch
.
Bluetooth
.
Wireless controls
>
Device name
. Enter a name
Bluetooth® wireless
49
Advertisement
Table of Contents
