Step 1: Get familiar with what you’re working with. After un-crating the machine, scan the QR code on the control panel to access all available manuals. CONTROLS & LEVERS FLAP OPENING LEVER Use lever when sweeping FORWARD RUNNING CONTROL LEVER a larger piece of debris.
Page 3
Step 2: Make some adjustments. Turn off machine before performing any adjustments. Adjust the Handlebars Lift the main hood. Release the 8 screws. Adjust the handlebar at the desired height for work, then tighten the screws. Adjust the Main Brush Pressure Lift the main hood.
Page 4
Step 3: Charge it up. Turn key to IDLE to determine current charge on indicator light. Charging the Machine Position the machine close to the battery charging area.* Check that the battery charger is connected to the battery. Check that the charging cord is connected to the battery charger, then OFF IDLE plug into outlet.
Page 5
ENGINEERED SIMPLICITY CONTACT US info@hammerheadclean.com HammerheadClean.com...