Summary of Contents for Campania International Chavon FT-368
Page 1
FT-368 Chavon Fountain Assembly Instructions Fountain Information: • This fountain holds approximately 2 gallon of water. • This fountain uses a small fountain cover: FTNCOV-SM • No refill device or submersible lights are suggested for this fountain. Pump Information: OEMPF140 - 140 GPH Pump (6 ft. cord length) Tools Required: Bubble Level Screwdriver...
Page 2
FT-368 Chavon Fountain Assembly Instructions Assemble your fountain on a level surface capable of holding a minimum of 100 lbs with an approximate 0.25 sq. ft. footprint (actual dimensions 5.75" Diam.). Step 1 - Position the basin (FT-368B) where the fountain is to be installed, ensuring that it is level. Step 2 - Assemble the pump kit: 2a - Using a hose clamp, attach the 1/2"...
Page 3
Maintenance: Pump Care - The fountain relies heavily on the quality of the pump. A well-maintained pump can last several years. Step 1 - Fully submerge: Ensure the pump is fully submerged at all times to avoid damage. Step 2 - Ensure water level is sufficient: Check water levels regularly as water may evaporate over time, and periodically change water to avoid algae buildup.