The Self-Test Function; The About Screen - Milwaukee M12 2580-20 Operator's Manual

3 M12™ Pipeline Locator Setup

3.11 The SELF-TEST Function

The SELF-TEST function confirms that the locator is operating within its set parameters.
The SELF-TEST should be run in an area free of interference from below ground or above
ground utilities.
1. Press the Menu button
2. Scroll to SELF-TEST, press SELECT.
3. Keep the Pipeline Locator still while the SELF-TEST is running.
The result will show a PASSED or FAILED screen.

3.12 The ABOUT Screen

The ABOUT screen shows the locator's serial number, calibration, and software information.
You may be asked to provide information from this screen when requesting technical
support.
1. Press the Menu button
2. Scroll to ABOUT, press SELECT.
3. Press the MENU button to return to the locate screens.
to enter SETTINGS.
Self Test
PASSED
to enter SETTINGS.
512Hz
Software Revision
Software Date
Software Time
Calibration Version
Calibration Date
Serial Number
PCB Identifier
About
1.00.001
04/27/2020
14:28:20.45
999
04/27/2020
103034508400
1
16
Self Test
FAILED