Web Service; Network Connection; Login - ADT DVR1604HF-U-E User Manual

4 Web Service

The web service contains the same functions as are available in local operation.
Note: There might be a slight difference in the screen depending on the model. The following
examples are for the 8-channel product.

4.1 Network Connection

Before web operation, check the following items:
1. Verify that you have a valid network connection.
2. Verify that the DVR and PC network setup is correct. Refer to network setup (Setup > Network).
3. Ping the DVR IP address (***.***.***.***) to verify that the connection is good. The return TTL value
is usually less than 255.
4. Open a browser window and input the DVR IP address. The system automatically downloads the
latest web control and overwrites the previous one if necessary.
5. To uninstall the web control, run uninstall webrec3.0.bat. Alternatively, you can go to
C:\Program Files\webrec to remove a single folder. Before you un-install, be sure close all web
pages to avoid errors.
Note: The Hybrid DVR supports most web browsers, such as Internet Explorer, Safari, Firebox
and Chrome. The device only supports 1-channel monitor on the Apple PC.

4.2 Login

To log in:
1. Open the browser and input the DVR IP address. For example, if your DVR IP is 10.10.3.16,
then input
http://10.10.3.16
DVR1604HF-U-E Hybrid DVR User Guide
Hybrid Standalone DVR User Guide
.
Input your IP
address here
Figure 4-1
4 Web Service
145