Advertisement
Please read the instruction carefully before operating the unit.
Charging the headphone
This headphone is equipped with a rechargeable lithium polymer battery. Use the provided USB cable. Connect one end to the headphone and the other end to a computer or use an adaptor (sold separately) and connect it to a wall socket.
Red LED on: Charging
Green LED on: Fully charged
Note: Please note that the USB cable can only be used for charging and not for data transfer.
It is recommended do not to charge the headphone during the music playback.
Using the built-in battery
Note: If you didn't use the headset for a long time, the battery may dry up. At this time, you have to charge the battery at least 5 hours.
Turning on / off the headphone
Functions | Operation | LED indicator |
Turning on | Slide the function switch to ON position | The Blue LED indicator will flash |
Turning off | Slide the function switch to OFF position | The Blue LED indicator will light off |
Pairing the headphone with Bluetooth devices
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by New One S.A.S is under license. Other trademarks and trade names are those of their respective owners.
Remarks:
Hereby, NEW ONE S.A.S, declares that this MUSE M-268 BT is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The declaration of conformity may be consulted at http://www.muse-europe.com/conformity/M-268BT.pdf
Play music from Bluetooth devices
Adjust volume level
Adjust the volume using the VOL+ / VOL- Volume buttons. You can also adjust the volume on the device to which you are paired.
Changing tracks/songs
To skip to the previous/next songs, press the or
button to change.
Before making a call used with your mobile phone, you need to pair and link your Bluetooth-enabled phone with the headphone.
Answer a Call
Reject a Call
To reject the call, press and hold the button for 3 seconds to reject call when the call is ringing.
NOTE: When you receive an incoming call, music audio will automatically mute. Once the call has ended, it depends entirely on you mobile phone whether the current track will return to playback or not.
Redial Call
Press and hold button for 3 seconds to redial.
Translation the call between mobile phone and the headphone
During a call, press or
button to transfer the call to mobile phone. Press again the
or
button to transfer the call back to the headphone.
When the battery is low, the red indicator will start to blink slowly. The headset will switch to standby mode automatically when the battery is too low to work.
Problem | Solution |
The headphone turns off automatically |
Recharge the battery |
No connection |
|
Not functioning correctly |
Charging the headphone so that to reset products |
Cannot stream music |
Make sure your device must support the A2DP Bluetooth profile. |
To prevent possible hearing damage, do not listen at high volume levels for long periods.
RECOMMENDATIONS
Weight: 157 g
Battery type: 3.7V 500mAh Lithium-ion Polymer battery
Bluetooth version: V2.1+EDR
Operating time: Up to 8 hours at 60% volume
Max output: 2 X 10mW
Charging voltage: 5.0V 500mA
Working distance: 5-10 meters measured in open space.
(Wall and structures may affect range of device).
If at any time in the future you should need to dispose of this product please note that Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. (Waste Electrical and Electronic Equipment Directive.)
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download Muse M-268 BT - Wireless Bluetooth Stereo Headphone Manual
Advertisement
Need help?
Do you have a question about the M-268 BT and is the answer not in the manual?
Questions and answers