Assembly Of Speaker Base - Monster HT SL100-CTR User Manual

CONTENTS
1 Rectangular Wood with Screw Holes
1 Metal Round Base
1 Wood Round Base
2 Screws (found on speaker cabinet)
ATTENTION: Be sure the base
is completely assembled before you
raise the speaker cabinet to the vertical
position or damage may occur.
INSTRUCTIONS
1. Check to ensure that you have all necessary parts.
2. Arrange base components in order as illustrated above and line up the screw holes.
3. Insert screws into holes and hand tighten.
4. Use a screwdriver to snug down screws until they are flush with the base.
Do not over-tighten or apply excessive force!

ASSEMBLY OF SPEAKER BASE

ASSEMBLY OF SPEAKER BASE
3