Date/Time Clock Functionality; Addressable – Set Up, #/Date; Set Or Change The Date And Time; Print/Display Date And Time - Monroe Classic User Manual

Date/Time Clock Functionality is addressable after depression of the Set Up key followed by a depression
of the #/Date key. Enabling this feature changes the operation of Memory I and Memory II to the
alternative functionality identified above and described below:
Enter
12.01.2002.8.30
When printed, date and time print on the same line, date formatted and left justified and time formatted
and right justified. The line prints in red.
If, in the above example the time was 8:30pm, the following sequence of key depressions would be used.
Enter
12.01.2002.8.30
When entering time, a positive value assumes the entry to be AM, while a negative value assumes PM.
This convention eliminates the necessity of using military time.
Enter
No Live Entry Exists
Enter
8.30

Date/Time Clock Functionality

Addressable – Set Up, #/Date
II*
Change Sign
II♦
End
II-
Start
II+
Compute

Set or Change the Date and Time

Example: December 1, 2002 – 8:30am
Press
Date/Time Stamp
Press
Change Sign
Date/Time Stamp

Print/Display Date and Time

Press
Date/Time Stamp
Convert Minutes to Decimal Equivalent
Press
HH.MM
M ↔ Dec
I*
Date/Time
Stamp
I♦
M ↔ Dec
I-
Days
I+
HH.MM
Display
12.01.2002 8.30
Display
12.012002830
12.01.2002 8.30
Display
12.01.2002 8.30
Display
8 30
8.50
Print
12 01 2002 8 30
Print
12 01 2002 8 30 P
Print
12 01 2002 8 30
Print
8 30
8.50