English Version Contents Features Specification Options The Control Panel & Function Keys How To Operate Optional Features Precautions Regular Maintenance...
: Start Counting by Manual 5) ACC Mode : Add different stacks of banknotes together 6) UV-Detection : Detect & Sort the counterfeit banknote out (Optional) Specification TC-5500(Desktop) TC-5500S(Floor Stand) 1) Dimensions(mm) WxDxH 374 x 374 x 260 374 x 374 x 830...
Page 4
Control Panel & Function Keys ※ The Display Number The counting result will be displayed on the LED screen. The number below was the accumulated number, it will show counting result when the user selecting this ACC function. ※...
※ The Preset Function Key This function is designed to set the number of banknote which needs to be counted. The counting will stop when the counted number of banknotes reaches your setting. The number below is the total number of counted notes.
Page 6
※ The Free Function Step 1: Press Free button, then the banknote gripper will be released with alarm. The machine is ready for counting now. Step 2: The maximum banknote capacity is approx. 200 pieces. Put the banknotes on the banknote holder and make the banknote touch the starting sensor.
Page 7
Step 2: Re-press the ACC button after the counting mode selected. (The lower part of LED display will show the number of “0” for starting the counting processing.) Step 3: The incorrect counting result will not be totaled if there is problem in counting process.
Optional Features ※ The Stamp Function Function: The device is design to stamp a mark (OK) on first banknote if the number of banknote is exactly 100 pieces. Step 1: Press Option button, then the banknote gripper will be ...
Page 9
How to Use the Feature of UV-Detection ※ There are 8 different UV-detecting levels can be selected. User can select the best sensitivity from 1 ~ 8 for the particular banknote. (In default setting, the detecting sensitivity level is 4) There are eight (1-8) different UV detect sensitivity can be...
The other one is the filters of spindle which are fixed on the top of spindle. Compressor Filters cleaning should be conducted once every 6 months and for the filters of spindle is every 2 months. 359 rue Vanderkindere, 1180 Bruxelles, Belgique ARPEGE SECURITY Email: info@arpege-security.com www .arpege-security.com...
Need help?
Do you have a question about the TC-5500 and is the answer not in the manual?
Questions and answers