Table of Contents
Advertisement
Quick Links
Installation and Operation Manual
Model No:
Important:
1. You are advised to read these instructions first before installation commences.
2. This manual must be handed to the end user after installation and commissioning.
3. These instructions are only valid if the country code appears on the appliance. If the code does not appear on the
appliance, refer to the technical instructions for adapting the appliance to the conditions for use in that country.
Introduction
We are confident that you will be delighted with your Lava Rock Griller, and it will become a most valued appliance
in your commercial kitchen.
To ensure you receive the utmost benefit from your new Griller, there are two important things you can do.
Firstly:
Please read the instruction book carefully and follow the directions given. The time taken will be well spent.
Secondly:
If you are unsure of any aspect of the installation, instructions or performance of your appliance, contact your dealer
promptly. In many cases a phone call could answer your question.
CE Only:
These instructions are only valid if the country code appears on the appliance. If the code does not appear on the
appliance, refer to the supplier of this appliance to obtain the technical instructions for adapting the appliance to the
conditions for use in that country.
INSTRUCTIONS TO BE FOLLOWED IN THE EVENT THE USER SMELLS GAS ARE TO BE POSTED IN A
PROMINENT LOCATION. THIS INFORMATION SHALL BE OBTAINED BY CONSULTING THE LOCAL GAS
SUPPLIER.
Technical Specifications Table
MODEL
DIMENSIONS
WIDTH (mm)
DEPTH (mm)
HEIGHT (mm)
GAS
FEED
PIPE
HEAT
INPUT
(kW)
LPG
NATURAL GAS
GAS LAVA ROCK GRILL
GLGK46-E GLGK66-E
WARNING:
Technical specification
GLGK46-E
400
600
420
G1/2〃
5.5
GLGK66-E
600
600
420
G1/2〃
11
Page 1
Advertisement
Table of Contents
Related Manuals for GGMgastro GLGK46-E
Summary of Contents for GGMgastro GLGK46-E
- Page 1 GAS LAVA ROCK GRILL Installation and Operation Manual GLGK46-E GLGK66-E Model No: Important: 1. You are advised to read these instructions first before installation commences. 2. This manual must be handed to the end user after installation and commissioning. 3. These instructions are only valid if the country code appears on the appliance. If the code does not appear on the appliance, refer to the technical instructions for adapting the appliance to the conditions for use in that country.
- Page 2 1. General Information 1) Read the instructions in this manual carefully, as they contain important information on how to install, use and service the appliance safely, properly, and effectively. 2) Keep this manual in a safe place so that it can be used as reference by other operators of the appliance. 3) This appliance should be installed following the instructions provided by the manufacturer and in compliance with all applicable local regulations.
- Page 3 4.1.1 Regulatory installation conditions For your information, we remind you that all appliances installed in public assembly buildings must meet all the requirements listed below. The appliance should be both installed and serviced in accordance with all applicable regulations and standards in force, namely: Safety regulations on fire hazard and panic in public assembly buildings.
- Page 4 NOTE: ALL GAS FITTING MUST ONLY BE CARRIED OUT BY A QUALIFIED PERSON. This appliances do not require an electrical connection, as they function totally on the gas supply only. It is essential that the gas supply is correct for the appliance to be installed and that adequate supply pressure and volume are available.
- Page 5 Pic 1: Nozzle 5.1 Adjust air ratio device Unscrew the control panel thus can see the adjust air ratio device from bottom view. Adjust the air ratio based on burner flame. 5.2 Replacing the nozzle of the pilot flame Place a 11-mm spanner on the pilot burner body to counterbalance torsional stress; With a 10-mm spanner, unscrew the nut fixing the thermocouple and remove the thermocouple;...
- Page 6 stainless steel surfaces. Wipe the appliance dry with a clean cloth. Never use water jets to clean the appliance. 6.2 Using the appliance 6.2.1 Operating controls By way of example, below are represented 2 of the most comprehensive appliances in this family. 6.2.2 Turning the burners on and off Fig 1 Fig 2...
- Page 7 Stains and abrasions on the steel surface Scratches and dark stains may be smoothed or removed using stainless steel wool pads or synthetic abrasive sponges, which should always be rubbed in the same direction as the satin finish. 6.3.3 Periodic maintenance Only qualified personnel are allowed to carry out service and maintenance operations.
Need help?
Do you have a question about the GLGK46-E and is the answer not in the manual?
Questions and answers