Table of Contents
Advertisement
Set interval time. This value is the time interval between
when a camera gets to one preset point and when the
camera starts to move to the next preset point. You
should set sufficient time so that you can monitor im-
age.
List proper preset point among registered ones in "Cur-
rent Group Member." According to the order that you
listed in a group, an external camera travels.
Click "Add/Change" button
In "Current Group Member" panel, all registered preset
points appear. At the bottom of this window, you can
check if the selected number is occupied or not.
Mode Configuration
There are three modes: "Normal Mode", "Swing Mode"
and "Group Mode."
In the normal mode, user can control pan/tilt/
zoom mechanism of an external camera
through the dvr/ptz control page.
If the swing mode is selected, the connected
pan/tilt/zoom camera swings between two pre-
set points. Time duration of "Wait (some) sec-
onds" signifies the same meaning that of group
mode. Administrator sets two swing points
among up to 64 preset points that are listed.
If the group mode is selected, the dome camera
travels by way of preset points set as a group
according to the listed order. Administrator selects the group from up to 6 groups listed
in the "Select Group".
52
DX-VS1UE User's Manual
Advertisement
Table of Contents
