Initial Settings; Setting Of The Digital Recorder; Setting Of This Unit; Mode Of This Unit - Mitsubishi Electric DX-KB5UE Installation And Operation Manual

Initial settings

(When connecting to the digital recorder DX-TL5000 series:)

Setting of the digital recorder

Setting of the cascade connection
Set the cascade connection mode and the recorder address in the <RS-485 Cascade Setting>
(System Menu
the detailed operation.

Setting of this unit

Set the rotaly switch on the rear of this unit to 1.

Mode of this unit

This unit is equipped with following 6 operational modes.
Recorder operational mode
This is the mode to operate the digital recorder connected. You can operate up to 16 digital
recorders when the cascade connection is made.
Keyboard menu setting mode
This is the mode to set the menu of this unit.
Recorder sequential display mode
This is the mode to sequentially switch the digital recorder of which picture is displayed at the
interval of specified switching time.
Recorder connection check mode
This is the mode to check the digital recorders connected.
PTZ operational mode
This is the mode to operate the function of the camera which supports PTZ function and
connected to the digital recorder. You can operate the camera which is connected up to 16 digital
recorders when the cascade connection is made. (This mode is invalid depending on the camera
connected.)
Camera menu mode
This is the mode to operate the menu of the camera connected. (This mode is invalid depending
on the camera connected.)
8
COM/LAN) of the digital recorder. Refer to the manual of the digital recorder for