Table of Contents
Advertisement
Trouble shooting
If problems with the unit persist even after you have followed the suggestions below, disconnect the
power cord and contact the retailer from whom you purchased the unit.
Description of problem
The recorder cannot be controlled.
The power cannot be turned on.
The recorder cannot be selected.
The camera cannot be controlled.
16
Consult the following
• Is the connection made correctly?
• Is the power of the recorder turned on?
• Is the cascade recorder address set?
• Is the desired recorder selected?
• Is the recorder in cascade mode?
• Is the AC adapter connected correctly?
• Is the connection made correctly?
• Is the power of the recorder turned on?
• Is the cascade recorder address set?
• Is the recorder in cascade mode?
• Is the connection made correctly?
Check the RS485 and RS-232C connections between
the digital recorder and the camera.
• Is the power of the recorder turned on?
• Is the <PTZ Setting> menu of the recorder set
correctly?
Advertisement
Table of Contents
