30
2. TV Menus
Lock, continued
Using TV Locks
After you set the lock, you must use your pass code to:
•
View a locked program
•
View a locked channel
•
View the locked TV
•
Cancel the lock
•
Open the Lock menus
Tips for Using the Lock Menu
When entering the Lock menu, you will be prompted to
enter a pass code.
•
To change the pass code, press 9 and LAST at the
same time. Either enter a new pass code to open
the Lock menu and make changes or press EXIT to
close the menu.
•
If any of the locks are turned on and you exit the
menus when prompted for a new code, the old code
and all lock settings will be retained.
For assistance call 1(800) 332-2119
IMPORTANT
When changing or deleting your pass code,
you must use the remote control included
with this TV. You cannot use a Mitsubishi
remote control from another component or a
"universal" remote.
•
If all locks are turned off and you exit the menus
when prompted for a new code, then the previous
code will be erased.
Bypassin g TV Locks
•
If you try to watch a blocked program or channel
or the TV is locked by time, a notice will appear
prompting you for a pass code. To use the TV, input
your four-digit pass code and press ENTER.
•
To reactivate the locks after using a pass code,
power the TV off and then on.
•
If a program is blocked, you can still use the TV
without entering a pass code. Change to a channel
airing an allowed program or change to another
device.
•
If you forget your pass code, you can view the
locked TV without entering your pass code. When
prompted for the pass code, press the number 9 and
LAST keys on the TV remote control at the same time.
This process temporarily unlocks the TV.